基于模糊综合评价与灰色关联分析法的多工艺方案评价

王佩; 张定华; 陈冰; 李山; 马光辉

基于模糊综合评价与灰色关联分析法的多工艺方案评价

1.
西北工业大学机电学院现代设计与集成制造技术教育部重点实验室, 西安 71007
2.
中国航空工业集团公司西安航空发动机(集团)有限公司, 西安 710021

基金项目: 国家自然科学基金(70931004)

计量
- 文章访问数: 1920
- HTML浏览量: 163
- PDF量: 553
- 被引次数: 0
出版历程
- 收稿日期: 2011-10-29
- 刊出日期: 2012-09-28

Evaluation of multi-process plans based on fuzzy comprehensive evaluation and grey relational analysis

1.
Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, School of Mechatronics, Northwestern Polytechnical University, Xi'an 71007
2.
Xi'an Aero-Engine (Group) Company Limited, Aviation Industry Corporation of China, Xi'an 710021, China

摘要

摘要: 为了使企业能够选择最佳的工艺方案指导实际生产,提出了基于模糊综合评价与灰色关联分析法的多工艺方案评价方法.该方法将模糊综合评价与灰色关联分析法融合在一起建立多工艺方案评价方法.在工艺方案优选结构图中通过对影响工艺方案质量的多种影响因素进行层次化分析,建立各影响因素的层次化模型;在数据标准化阶段,采用隶属度进行数据标准化操作;在计算权重时,在权重误差平方和最小的条件下采用主客观权重相结合的权重计算方法来代替传统灰色关联分析中的均值权重方法;最后通过关联系数和组合权重确定工艺方案的排序.以某航空发动机叶片零件来建立实例,结果表明:该方法具有良好的实用效果,满足多工艺方案优选的实际要求.
- 多工艺方案评价 /
- 模糊综合评价 /
- 灰色关联分析 /
- 权重计算 /
- 最佳工艺方案
Abstract: To provide evidence for enterprises to choose the best process plan,the method of multi-process plan evaluation based on fuzzy comprehensive evaluation and grey relational analysis was proposed.In this method,the fuzzy comprehensive evaluation and grey relational analysis were integrated to build a multi-process plan evaluation method.Hierarchical analysis was made in the structure figure of process plan selection process by various factors which affected the quality of process plans,and the hierarchical model of these factors was built.While standardizing data,membership degree was adopted to finish it.While caculating weight,the fuzzy comprehensive evaluation and the variation coefficient method were combined to calculate weight instead of the average weight method in the grey relational analysis.Then,sorting process plans were achieved by correlation coefficients and combined weight.Finally,an aircraft engine blade was developed to illustrate the feasibility and validity of the proposed evaluation method.
- multi-process plan evaluation /
- fuzzy comprehensive evaluation /
- grey relational analysis /
- weight computing /
- the best process plan

HTML

参考文献(16)

[1]	刘新华,张旭堂,刘文剑.基于改进最大-最小蚂蚁系统的多工艺路线决策方法[J].计算机集成制造系统,2008,14(12):2414-2420. LIU Xinhua,ZHANG Xutang,LIU Wenjian.Multi-process routes decision-making methodology based on improved max-min ant system[J].Computer Integrated Manufacturing Systems,2008,14(12):2414-2420.(in Chinese)
[2]	程光耀,孙厚芳,雷贺功,等.CAPP多工艺方案的模糊综合评价[J].北京理工大学学报,2004,24(3):197-200. CHENG Guangyao,SUN Houfang,LEI Hegong,et al.Fuzzy synthetic estimation of multi-process planning schemes in CAPP[J].Journal of Beijing Institute of Technology,2004,24(3):197-200.(in Chinese)
[3]	ZHANG Jianfeng,PENG Anhua.Decision-making of slicing scheme in fused deposition modeling processs based on analytical hierarchical process[J].Nanjing University of Aeronautics and Astronautics,2010,27(2):125-130.
[4]	陈亚哲,刘桂珍,刘挺,等.基于熵权的产品广义质量模糊综合评价[J].东北大学学报2010,2(31):241-244. CHEN Yazhe,LIU Guiz hen,LIU Ting,et al.Comprehensive fuzzy evaluation for generalized product quality based on entropy weight[J].Journal of Northeastern University,2010,2(31):241-244.(in Chinese)
[5]	Wang M,Wang Z,Wang J.Research on ANN-based machining operation selection for rotational parts[J].Journal of University of Electronic Science and Technology of China,2010,39(2):470-474.
[6]	Cai N,Wang L,Fenga H Y.GA-based adaptive setup planning toward process planning and scheduling integration[J].International Journal of Production Research,2009,47(10):2745-2766.
[7]	Li X,Gao L,Shao X,et al.Mathematical modeling and evolutionary algorithm-based approach for integrated process planning and scheduling[J].Computers and Operations Research,2010,4(37):656-667.
[8]	Guo Y W,Li W D,Mileham A R,et al.Optimisation of integrated process planning and scheduling using a particle swarm optimisation approach[J].International Journal of Production Research,2009,47(14):3775-3796.
[9]	张丹,左敦稳,焦光明,等.基于粒子群遗传算法的航天产品装配顺序优化方法[J].兵工学报,2010,31(9):1228-1234. ZHANG Dan,ZUO Dunwen, JIAO Guangming,et al.Assembly sequence planning for aerospace products based on particle swarm optimization and genetic algorithm[J].Acta Armamentarii,2010,31(9):1228-1234.(in Chinese)
[10]	田颖,江平宇,周光辉,等.基于蚁群算法的零件多工艺路线决策方法研究[J].计算机集成制造系统,2006,12(6):882-887. TIAN Ying,JIANG Pingyu,ZHOU Guanghui,et al.Research on part multiple process routes decision making based on ant colony algorithm[J].Computer Integrated Manufacturing Systems,2006,12(6):882-887.(in Chinese)
[11]	刘英平,高新陵,沈祖诒.基于模糊数据包络分析的产品设计方案评价研究[J].计算机集成制造系统,2007,13(11):2099-2104. LIU Yingping,GAO Xinling,SHEN Zuyi.Product design schemes evaluation based on fuzzy DEA[J].Computer Integrated Manufacturing Systems,2007,13(11):2099-2104. (in Chinese)
[12]	刘英平,林志贵,沈祖诒.基于改进的数据包络分析模型的绿色产品评价研究[J].中国机械工程,2005,16(20):1809-1813. LIU Yingping,LIN Zhigui,SHEN Zuyi.Study on green product evaluation based on modified data envelopment analysis model[J].China Mechanical Engineering,2005,16(20):1809-1813.(in Chinese)
[13]	韦韫,李东波,焦光明,等.装配资源重构评价体系研究[J].中国机械工程,2008,19(17):2059-2063. WEI Yun,LI Dongbo,JIAO Guangming,et al.Research on evaluation system for assembling resource reconfiguration[J].China Mechanical Engineering,2008,19(17):2059-2063.(in Chinese)
[14]	吴坚,梁昌勇,李文年.基于主观与客观集成的属性权重求解方法[J].系统工程与电子技术,2007,29(3):383-387. WU Jian,LIANG Changyong,LI Wennian.Method to determine attribute weights based on subjective and objective integrated[J].Systems Engineering and Electronics,2007,29(3):383-387.(in Chinese)
[15]	姚倡锋,张定华,卜昆,等.异地协同资源优化配置过程模型及实现[J].计算机集成制造系统,2008,14(3):455-461. YAO Changfeng,ZHANG Dinghua,BU Kun,et al.Collaborative manufacturing resources optimization deployment process model and realization[J].Computer Integrated Manufacturing Systems,2008,14(3):455-461.(in Chinese)
[16]	门宝辉,梁川.基于变异系数权重的水质评价属性识别模型[J].哈尔滨工业大学学报,2005,37(10):1373-1375. MEN Baohui,LIANG Chuan.Attribute recognition model based variation coefficient weight for evaluating water quality[J].Journal of Harbin Institute of Technology,2005,37(10):1373-1375.(in Chinese)