整流支板和火焰稳定器的一体化设计及性能分析

李锋; 程明; 郭瑞卿; 尚守堂; 唐正府; 李龙贤

整流支板和火焰稳定器的一体化设计及性能分析

李锋¹,
程明^1,2,
郭瑞卿¹,
尚守堂^1,2,
唐正府^1,2,
李龙贤¹

1.
北京航空航天大学能源动力学院,北京 100191
2.
中国航空工业集团公司沈阳发动机设计研究所,沈阳 110015

基金项目: 国家自然科学基金(90716025,50476005)

计量
- 文章访问数: 1908
- HTML浏览量: 4
- PDF量: 690
- 被引次数: 0
出版历程
- 收稿日期: 2012-05-23
- 刊出日期: 2012-10-28

Frame plate and flame holder integration design and capability analysis

1.
School of Jet Propulsion, Beijing University of Aeronautics and Astronautics,Beijing 100191 ,China
2.
Shenyang Aeroengine Design and Research Institue, Aviation Industry Corporation of China,Shenyan 110015,China

摘要

摘要: 针对航空发动机高推质比、高隐身的需求,提出一种加力燃烧室整流支板和火焰稳定器一体化设计的方法,并开展了相关模型加力燃烧室的计算和试验研究.研究结果表明:采用一体化设计加力燃烧室,能够缩短加力燃烧室长度,大幅降低非加力状态的冷态流阻,明显改善发动机加力燃烧室的性能,提高发动机的推质比.可为解决高推质比、高隐身发动机技术提供了一种新的思路和研究方向.
- 一体化整流支板 /
- 整流支板设计 /
- 火焰稳定器 /
- 加力燃烧室 /
- 冲压燃烧室
Abstract: Based on the increasing demand for high thrust weight ratio and high stealthy aero-engine,the design method of integration design frame plate and flame holder afterburner was given and some model afterburner simulations and experiments were conducted.The results show that the length and can flow resistance could be reduced greatly,and the capability and thrust weight ratio of aero-engine can be increased apparently.This work would help to provide a new research direction and method for high thrust weight ratio and high stealthy aero-engine technology.
- integration frame plate /
- frame plate design /
- flame holder /
- afterburner /
- ramjet burner

HTML

参考文献(14)

[1]	梁春华.通用的、可承担起的先进涡轮发动机(VAATE)计划[J].航空发动机,2001,27(3):42.
[2]	杨开田,张孝先,王泽军,等,航空发动机设计手册:第11册加力燃烧室[M].北京:航空工业出版社,2001:235-236.
[3]	季鹤鸣,樊于军, 杨茂林.新型内突扩加力燃烧室方案可行性分析[J].航空发动机,2006;32(1):35-37. JI Heming,FAN Yujun,YANG Maolin.Feasibility analysis of a new dumped afterburner concept[J].Aeroengine,2006,32(1):35-37.(in Chinese)
[4]	孙雨超,张志学,李江宁,等.一体化加力燃烧室方案设计及数值研究[J].航空科学技术,2011(4):71-74. SUN Yuchao,ZHANG Zhixue,LI Jiangning,et al.Design and numerical research of integrated rear frame and afterburner[J].Aeronautical Science & Technology,2011(4):71-74.(in Chinese)
[5]	马梦颖,金捷,季鹤鸣.航空发动机加力燃烧室技术及新颖结构方案[J].燃气涡轮试验与研究,2008;21(4):55-59. MA Mengying,JIN Jie,JI Heming.Technology and new configuration of aero-engine afterburner[J].Gas Turbine Experiment and Research,2008,21(4):55-59.(in Chinese)
[6]	李锋,曹会东,陈维,等.离散孔波纹板气膜冷却的实验研究[J].燃烧科学与技术,2004;10(3):271-275. LI Feng,CAO Huidong,CHEN Wei,et al.Research on discrete hole wave board file cooling technology[J].Journal of Combustion Science,2004,10(3):271-274.(in Chinese)
[7]	Jeffery A L,Torence P B,Derk S P,et al.Development needs for advanced afterburner designs .AIAA 2004-4192,2004.
[8]	Ebrahimi H B.Overview of gas turbine augmentor design,operation,and combustion oscillation .AIAA 2006-4916,2006.
[9]	Lubarsky E,Cross C,Cutright J T,et al,Novel carbureted flame holder for improved afterburner stability .AIAA 2008-98,2008.
[10]	Shahnam M,Wu P K,Kirkendall K,et al.Combustion instability of a diffusion flame using an integrated fuel injector/flameholder device .Reno,NV:36th Aerospace Science Meeting & Exhibit,AIAA 98-0639,1998.
[11]	Birmaher S.Development of a 'Prime and Trigger’ concept for compact afterburner combustion .AIAA 2007-0562,2007.
[12]	Sippel M,Deidewig F.Evaluation of high speed turbojet/turbofan engine concepts on the performance of the DSL STS-booster stage .AIAA 95-2750,1995.
[13]	Raffoul C N,Nejad A S.Entrainment and mixing characteristics of bluff body flameholders;an experimental and numerical study .AIAA 94-0710,1994.
[14]	钱翼稷.空气动力学[M].北京:北京航空航天大学出版社,2004:110-111.