蒸发管蒸发及雾化特性

阮昌龙; 许全宏; 孙东文; 张弛; 林宇震

蒸发管蒸发及雾化特性

1.
北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室,北京 100191
2.
中国航空工业集团公司哈尔滨东安发动机集团公司航空动力机械研究所,哈尔滨 150066

计量
- 文章访问数: 1950
- HTML浏览量: 96
- PDF量: 546
- 被引次数: 0
出版历程
- 收稿日期: 2011-11-30
- 刊出日期: 2012-10-28

Vaporization and spray characteristics of vaporizer

1.
National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics, School of Jet Propulsion,Beijing University of Aeronautics and Astronautics, Beijing 100191,China
2.
Aviation Powerplant and Machinery Research Institute, Harbin Dongan Engine(Group) Corporation Limited, Aviation Industry Corporation of China,Harbin 150066,China

摘要

摘要: 为了研究某型发动机中的Γ型蒸发管的蒸发性能,在进口空气为常压条件下进行实验研究.实验采用燃气加热,模拟实际蒸发管工作环境.实验研究气油比、进口空气温度以及蒸发管管壁温度的变化对蒸发管燃油蒸发率及出口索太尔平均直径SMD(Sauter mean diameter)的影响.实验结果表明:气油比(AFR)、蒸发管空气进口温度及蒸发管壁温对蒸发率及SMD都有着很大的影响,气油比的增大和空气进口温度的增大以及蒸发管壁温的提高都会导致燃油蒸发率的增大和出口SMD直径的减小,而三者中壁温的作用最为显著.
- 航空发动机 /
- 雾化特性 /
- 蒸发管 /
- 蒸发率 /
- 索太尔平均直径
Abstract: Experimental study on vaporization characteristics of a certain type of engine's “Γ” type vaporizer was presented.The experiments were conducted under the atmospheric air pressure,using hot gas to heat the vaporizer,just like what the engine did.The main factors of the vaporization rates and Sauter mean diameter (SMD) including the air/fuel ratio(AFR),vaporizer inlet air temperature and the temperature of the wall of the vaporizer were studied.From the test results,it can be concluded that all of these three factors have great effects on the vaporization rates and the SMD.The increases of these factors would cause an increase in the vaporization ratio and a decrease in the SMD,and among these factors the wall temperature plays the most significant role.
- aero-engine /
- spray characteristics /
- vaporizer /
- vaporization rate /
- Sauter mean diameter

HTML

参考文献(12)

[1]	林宇震,许全宏,刘高恩.燃气轮机燃烧室[M].北京:国防工业出版社,2008.
[2]	朱菁,郭新华,林宇震,等.微小“T”型蒸发管蒸发率实验[J].航空动力学报,2007,22(8):1273-1277. ZHU Jing,GUO Xinhua,LIN Yuzhen,et al.Experimental research on vaporization rate of micro “T”-vaporizer[J].Journal of Aerospace Power,2007,22(8):1273-1277.(in Chinese)
[3]	Sotheran A.The Rolls-Royce annular vaporizer combustor .ASME Paper 83-GT-49,1983.
[4]	Tamaru T,Suzuki K,Oppaty Y.A study of a fuel vaporizer for a gas turbine engine .JSAE Paper 19,1987:135-141.
[5]	林宇震,刘俊,许全宏,等.微小“Γ”型蒸发管在常压条件下蒸发率研究[J].航空动力学报,2006,21(5):843-847. LIN Yuzhen,LIU Jun,XU Quanhong,et al.Study on vaporization rate of a mini Γ-vaporizer under atmospheric pressure condition[J].Journal of Aerospace Power,2006,21(5):843-847.(in Chinese)
[6]	熊庆荣,雷雨冰,黄国平,等.厘米级微型蒸发管式燃烧室性能实验研究[J].航空动力学报,2007,22(5):733-737. XIONG Qingrong,LEI Yubing,HUANG Guoping,et al.Experimental research on a centimeter-scale micro combustor with vaporizing tube[J].Journal of Aerospace Power,2007,22(5):733-737.(in Chinese)
[7]	光辉,许全宏,朱菁,等.一种离心喷嘴多孔蒸发管的蒸发率实验[J].航空动力学报,2011,26(2):337-342. GUANG Hui,XU Quanhong,ZHU Jing,et al.Experimental study of evaporation rate for multihole vaporizer with pressure swirl atomizer[J].Journal of Aerospace Power,2011,26(2):337-342.(in Chinese)
[8]	诸惠民,赵广平.蒸发管气动性能的试验研究 //中国航空学会第三届燃烧会议论文集.北京:中国航空学会,1982:14-21.
[9]	胡正义.蒸发管内雾化和蒸发过程的研究[J].燃气涡轮试验与研究,1989,2(4):45-54. HU Zhengyi.Research on pulverization and vaporizing process in vaporizing tube[J].Experiment and Research of Gas Turbine,1989,2(4):45-54.(in Chinese)
[10]	斯坦因.旋风分离器——原理,设计和工程应用[M].北京:化学工业出版社,2004.
[11]	杨世铭.传热学[M].4版.北京:高等教育出版社,2008.
[12]	张弛,张荣伟,徐国强,等.直射式双旋流空气雾化喷嘴的雾化效果[J].航空动力学报,2006,21(5):806-809. ZHANG Chi,ZHANG Rongwei,XU Guoqiang,et al.Experimental investigation on atomization of an air-blast atomizer with plain-orifice nozzle and dual-swirl cup[J].Journal of Aerospace Power,2006,21(5):806-809.(in Chinese)