Analysis of blade vibration response induced by rotating stall in axial compressor
Analysis of blade vibration response induced by rotating stall in axial compressor
-
摘要: An experimental and numerical study was conducted to investigate the forced response of blade vibration induced by rotating stall in a low speed axial compressor. Measurements have been made of the transient stalling process in a low speed axial compressor stage. The CFD study was performed using solution of 3-dimensional Navier-Stokes equations, coupled with structure finite element models for the blades to identify modal shapes and structural deformations simultaneously. Interactions between fluid and structure were managed in a coupled manner, based on the interface information exchange until convergence in each time step. Based on the rotating stall measurement data obtained from a low speed axial compressor, the blade aeroelastic response induced by the rotating stall flow field was analyzed to study the vibration characteristics and the correlation between the phenomena. With this approach,good agreement between the numerical results and the experimental data was observed. The flow phenomena were well captured, and the results indicate that the rotating field stall plays a significant role in the blade vibration and stress affected by the flow excitation.Abstract: An experimental and numerical study was conducted to investigate the forced response of blade vibration induced by rotating stall in a low speed axial compressor. Measurements have been made of the transient stalling process in a low speed axial compressor stage. The CFD study was performed using solution of 3-dimensional Navier-Stokes equations, coupled with structure finite element models for the blades to identify modal shapes and structural deformations simultaneously. Interactions between fluid and structure were managed in a coupled manner, based on the interface information exchange until convergence in each time step. Based on the rotating stall measurement data obtained from a low speed axial compressor, the blade aeroelastic response induced by the rotating stall flow field was analyzed to study the vibration characteristics and the correlation between the phenomena. With this approach,good agreement between the numerical results and the experimental data was observed. The flow phenomena were well captured, and the results indicate that the rotating field stall plays a significant role in the blade vibration and stress affected by the flow excitation.
-
Key words:
- compressor /
- rotating stall /
- blade forced response /
- CFD /
- fluid-structure interaction
-
[1] Greitzer E M.Review-axial compressor stall phenomena[J].Journal of Fluids Engineering,1980,102(2):134-151. [2] Hoying D A,Tan C S,Vo H D,et al.Role of blade passage flow structures in axial compressor rotating stall inception[J].Journal of Turbomachinery, 1999, 121(4): 735-742. [3] Vo H D,Tan C S,Greitzer E M.Criteria for Spike Initiated Rotating Stall .ASME paper GT 2005-68374,2005. [4] Bennington M A,Ross M H,Cameron J D,et al.An experimental and computational investigation of tip clearance flow and its impact on stall inception .ASME paper GT 2010-23516,2010. [5] Adamczyk J J,Celestina M L,Greitzer E M.The role of tip clearance in high-speed fan stall[J].Journal of Turbomachinery,1993,115(1):28-38. [6] Wu Y H,Chu W L,Lu X G.The effect of tip leakage flow structure on compressor aerodynamics[J].Chinese Journal of Engineering Thermophysics,2006,27(6):950-952. [7] Zhao B, Li S B, Li Q S,et al.Unsteady numerical research into the impact of bleeding on axial compressor performance .ASME FEDSM-ICNMM2010-30228,2010. [8] Huppert M C,Calvert H F,Meyer M J.Experimental investigation of rotating stall and blade vibration in the axial-flow compressor in a turbojet engine .NACA RM-E54A08,1954. [9] Calvert H F,Medeiros A A,Garrett F B.Axial-flow compressor rorating stall and rotor blade vibration survey .NACA RM-E54K29,1955. [10] Sankar L N,Prasad J V R,Neumeier Y,et al.Recent progress in compressor stall and surge control .AIAA-99-3124,1999. [11] Calvert H F,Johnson D F,Lucas J G.Effect of interstage bleed on rorating stall and blade vibration in a 13-stage axial-flow compressor in a turbojet engine .NACA RM-E56106,1957. [12] Engeda A.Rotating stall in centrifugal compressor and its effect on induced vibration .AIAA-94-2973,1994. [13] Doi H,Alonso J J,Fluid/structure coupled aeroelastic computations for transonic flows in turbomachinery .ASME paper GT 2002-30313,2002. [14] ZHANG Mingming,HOU Anping,ZHOU Sheng,et al.Investigation on blade flutter in transonic compressor with a coupled numerical approach .ASME IMECE,2011-63218,2011. [15] Li Z P, Li Q S,Yuan W,et al.The experimental research on a new method for extending the axial-compressors stall margin[J].Chinese Journal of Aerospace Power,2006,21(3):485-491.
点击查看大图
计量
- 文章访问数: 1391
- HTML浏览量: 2
- PDF量: 1364
- 被引次数: 0