留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

叶片扩压器倒角对压气机性能影响的数值研究

汤惠 宁方飞

汤惠, 宁方飞. 叶片扩压器倒角对压气机性能影响的数值研究[J]. 航空动力学报, 2012, 27(10): 2297-2306.
引用本文: 汤惠, 宁方飞. 叶片扩压器倒角对压气机性能影响的数值研究[J]. 航空动力学报, 2012, 27(10): 2297-2306.
TANG Hui, NING Fang-fei. Numerical investigation of effect of radial vane diffuser fillet on performance of centrifugal compressor[J]. Journal of Aerospace Power, 2012, 27(10): 2297-2306.
Citation: TANG Hui, NING Fang-fei. Numerical investigation of effect of radial vane diffuser fillet on performance of centrifugal compressor[J]. Journal of Aerospace Power, 2012, 27(10): 2297-2306.

叶片扩压器倒角对压气机性能影响的数值研究

Numerical investigation of effect of radial vane diffuser fillet on performance of centrifugal compressor

  • 摘要: 研究了单级离心压气机中径向叶片扩压器倒角对其气动性能的影响.在倒角较小时,压气机单级性能改变不大,随着倒角的增大,堵点流量降低,效率和压比下降.在此基础上,开展了优化径向叶片扩压器倒角从而提升离心压气机气动性能的研究.结果表明:在径向扩压器吸力面采用无倒角或小倒角结构,防止流量堵塞,而在压力面采用沿弦向变半径倒角结构,抑制和消除压力面存在的分离,这种结构可明显提升所研究的离心压气机的气动性能.另外,进一步研究了在轮毂和机匣处分别采用如上倒角结构对气动性能的影响,发现轮毂处变倒角对性能优化起了主要作用.

     

  • [1] Deburge L L.The aerodynamic significance of fillet geometry in turbo compressor blade rows[J].ASME Journal of Engineering for Power,1980,102(4):984-993.
    [2] Zess G A,Thole K A.Computational design and experimental evaluation of using a leading edge fillet on a gas turbine vane[J].ASME Journal of Turbomachinery,2002,124(2):167-175.
    [3] Pieringer P,Sanz W.Influence of the fillet between blade and casing on the aerodynamic performance of a transonic turbine vane .ASME Paper GT2004-3119,2004.
    [4] Curlett B P. The aerodynamic effect of fillet radius in a low speed compressor cascade .National Aeronautics and Space Administration,Lewis Research Center,USE,NASA-TM-105347,1991.
    [5] Hoeger M,Schmidt-Eisenlohr U,Gomez S,et al.Numerical simulation of the influence of a fillet and a bulb on the secondary flow in a compressor cascade[J].Task Quartrly,2002,6(1):25-37.
    [6] Hoeger M,Baier R D,Müller R,et al.Impact of a fillet on diffusing vane endwall flow structure //The 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery.Honolulu,Hawaii:ISROMAC,2006:57.
    [7] Meyer R,Schulz S,Liesner K.A parameter study on the influence of fillets on the compressor cascade performance[J].Journal of Theoretical and Applied Mechanics,2012,50(1):131-145.
    [8] Goodhand M N, Miller R J.The impact of real geometries on three-dimensional separation in compressors .ASME paper GT2010-22246,2010.
    [9] Kügeler E,Nümberger D,Weber A,et al.Influence of blade fillets on the performance of a 15 stage gas turbine compressor .ASME paper GT2008-50748,2008.
    [10] 毛明明,宋彦萍,王仲奇.倒角和间隙对跨音轴流压气机气动性能的影响[J].热能动力工程,2005,20(5):469-473. MAO Mingming,SONG Yanping,WANG Zhongqi.The influence of blade root fillet and blade tip clearance on the aerodynamic performance of a transonic axial compressor[J].Journal of Engineering for Thermal Energy and Power,2005,20(5):469-473.(in Chinese)
    [11] 石龑,李少军,李军,等.动叶栅倒角对透平级气动性能的影响[J].航空动力学报,2010,25(8):1842-1848. SHI Yan,LI Shaojun,LI Jun et al.Influence of rotor blade fillets on turbine stage performance [J].Journal of Aerospace Power,2010,25(8):1842-1848.(in Chinese)
    [12] 王大磊,朴英,陈美宁.叶根倒角对轴流涡轮转子流场的影响[J].航空动力学报,2011,26(9):2075-2081. WANG Dalei,PU Ying,CHEN Meining.Influence of the root fillet on the flow pattern of an axial turbine rotor[J].Journal of Aerospace Power,2011,26(9):2075-2081.(in Chinese)
    [13] 康顺,孙丽萍.叶根倒角对离心叶轮气动性能的影响[J].工程热物理学报,2009,30(1):41-43. KANG Shun,SUN Liping.Influence of root fillet on the aerodynamic performance of centrifugal impeller[J].Journal of Engineering Thermophysics,2009,30(1):41-43.(in Chinese)
    [14] 宁方飞.考虑真实几何复杂性的跨音压气机内部流动的数值模拟 .北京:北京航空航天大学,2002. NING Fangfei.Numerical simulation of the transonic compressor inner flow considering real geometrical complexity .Beijing:Beijing University of Aeronautics and Astronautics,2002.(in Chinese)
    [15] NING Fangfei,XU Liping.Numerical investigation of transonic compressor rotor flow using an implicit 3D flow solver with one-equation Spalart-Allmaras turbulence model .ASME paper GT2001-0359,2001.
  • 加载中
计量
  • 文章访问数:  2315
  • HTML浏览量:  236
  • PDF量:  634
  • 被引次数: 0
出版历程
  • 收稿日期:  2012-03-28
  • 刊出日期:  2012-10-28

目录

    /

    返回文章
    返回