喷丸强化对TC11合金模拟叶片高周疲劳寿命影响的试验

王梅; 陆山; 古远兴; 刘亮; 张欢

喷丸强化对TC11合金模拟叶片高周疲劳寿命影响的试验

王梅^1,2,
陆山¹,
古远兴²,
刘亮²,
张欢²

1.
西北工业大学动力与能源学院,西安 710072
2.
中国航空工业集团公司中国燃气涡轮研究院,成都 610500

计量
- 文章访问数: 2016
- HTML浏览量: 278
- PDF量: 1236
- 被引次数: 0
出版历程
- 收稿日期: 2012-04-06
- 刊出日期: 2013-03-28

Experiment of effect of shot peening strengthening on TC11 alloy simulation blade's HCF life

1.
School of Power and Energy, Northwest Polytechnical University, Xi'an 710072
2.
China Gas Turbine Establishment, Aviation Industry Corporation of China, Chengdu 610500, China

摘要

摘要: 针对三种叶片:钢丸强化、二次强化和未强化的钛合金叶片进行了振动特性测量和高周疲劳对比试验.通过试验结果,结合断口分析,对三种叶片的固有频率、振型阻尼比、高周疲劳极限及裂纹起源等方面进行了对比研究.研究表明:喷丸后叶片1阶振型阻尼比增大40%～50%,高周疲劳极限提高40%以上,叶片的高周疲劳寿命也相应地提高.从强化机理方面分析了高周疲劳极限得到提高的原因.该积累的试验数据及研究成果可为TC11喷丸叶片的高周疲劳工程设计提供参考.
- 喷丸强化 /
- 高周疲劳 /
- 强化机理 /
- 振动 /
- 寿命
Abstract: The vibration characteristic measurement and high cycle fatigue(HCF) comparison test were applied out to unstrengthened,steel grit strengthened and double strengthened blades.Through experimental results and fracture analysis,the three kinds of blades' natural frequency,damping ratio crack origin and HCF limit were studied and compared.The study indicates that the first order damping ratio is improved about 40%—50%,and HCF limit is improved more than 40%,and HCF life is improved accordingly.The article also give the reason of HCF limit improvement was also analyzed from strengthening mechanism.The experimental data accumulated and the study result can offer references to engineering design.
- shot peening strengthening /
- high cycle fatigue(HCF) /
- strengthening mechanism /
- vibration /
- life

HTML

参考文献(15)

[1]	许正功,陈宗贴,黄龙发.表面形变强化技术的研究现状[J].装备制造技术,2007(4):69-71. XU Zhenggong,CHEN Zongtie,HUANG Longfa.Research on the outline of strengthening technology of surface deformation[J].Equipment Manufacture Technology,2007(4):69-71.(in Chinese)
[2]	刘春阳. 方兴未艾的喷丸强化处理新技术[J].世界产品与技术,1997(2):10-11. LIU Chunyang.The new technology of shot penning[J].The World Production and Technology,1997(2):10-11.(in Chinese)
[3]	董星,段雄.喷丸强化机械及技术的发展[J].矿山机械,2004,32(7):66-68. DONG Xing,DUAN Xiong.The development of shot penning strengthening[J].Machinery and Technology,2004,32(7):66-68.(in Chinese)
[4]	孙西泰.材料表面强化技术[M].北京:化学工业出版社,2005.
[5]	彭明镜.喷丸强化技术最新进展与装备[J].铸造工程:造型材料,2004(1):43-44. PENG Mingjing.New development of shot-peening strengthening technique and equipment[J].Foundry Engineering:Molding Material,2004(1):43-44.(in Chinese)
[6]	袁礼.喷丸强化工艺技术的研究与改进[J].成飞科技,2006(1):22-26. YUAN Li.The research and improvement of shot-peening strengthening technique[J].Chengfei,2006(1):22-26.(in Chinese)
[7]	周正裕.压气机第1级转子叶片喷丸强化工艺[J].航天工艺,1996(3):18-21. ZHOU Zhengyu.The shot-peening strengthening technology of the first stage compressor rotor blade[J].Astronautics Technology,1996(3):18-21.(in Chinese)
[8]	李家宝,盖秀颖,徐建辉.硬状态钢喷丸影响层组织强化的表征[J].材料研究学报,2003,17(2):214-218. LI Jiabao,GAI Xiuying,XU Jianhui.Characterization of structure strengthening for shot penning affected layers of steels in hard state[J].Chinese Journal of Materials Research,2003,17(2):214-218.(in Chinese)
[9]	李家宝.利用X射线衍射方法确定金属工艺表面的应力-应变关系[J].材料研究学报,1998,12(3):287-288. LI Jiabao.Determination of superficial stress-strain relationship with X-ray diffraction technique[J].Chinese Journal of Material Rsearch,1998,12(3):287-288.(in Chinese)
[10]	董星,段雄.高压水射流喷丸强化技术[J].表面技术,2005,34(1):48-49. DONG Xing,DUAN Xiong.Shot-peening technique of high pressure water jet flow[J].Surface Technology,2005,34(1):48-49.(in Chinese)
[11]	滦伟玲,涂善东.喷丸表面改性技术研究进展[J].中国机械工程,2005,16(15):1405-1409. LUAN Weiling,TU Shandong.Shot-peening surface modified techniques research advancement[J].Mechanical Engineering of China,2005,16(15):1405-1409.(in Chinese)
[12]	中国人民解放军第六研究院.金属材料喷丸强化及疲劳强度[M].北京:国防工业出版社,1973.
[13]	王仁智.表面喷丸强化技术[M].北京:航空航天部621研究所,1990.
[14]	王仁智.航空材料喷丸强化手册[M].北京:航空航天部AFFD系统工程局,1988.
[15]	张洪伟,张以都,吴琼.喷丸强化残余应力场三维数值仿真分析[J].航空动力学报,2010,25(3):603-609. ZHANG Hongwei,ZHANG Yidu,WU Qiong.Three-dimensional numerical analysis of residual stress field for shot-peening[J].Journal of Aerospace Power,2010,25(3):603-609.(in Chinese)