高温磁悬浮轴承励磁绕组制造技术

金超武; 鲁旭东; 朱益利; 徐龙祥

高温磁悬浮轴承励磁绕组制造技术

南京航空航天大学机电学院,南京 210016

基金项目: 航空科学基金(2008ZB52018)

计量
- 文章访问数: 1690
- HTML浏览量: 86
- PDF量: 1207
- 被引次数: 0
出版历程
- 收稿日期: 2012-03-13
- 刊出日期: 2013-03-28

Excitation coil manufacturing technology for high temperature active magnetic bearing

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

摘要

摘要: 针对国内外高温励磁绕组存在的缺陷与不足,提出了一种新型的迷宫形励磁绕组结构,首先通过电火花线切割制造出单层迷宫形线圈,并在线圈匝间和层间充分均匀地填充耐高温绝缘材料;然后通过真空钎焊工艺实现多层迷宫形线圈的牢固焊接,最后将焊接成型的多层线圈封装成迷宫形绕组,并应用于单自由度高温磁悬浮轴承试验台中,实现了550℃被悬浮物体近20h的稳定悬浮.研究结果表明:线圈焊缝的高温电阻值小,抗剪切强度满足要求,焊缝的金相组织致密均匀;绕组匝间和层间绝缘性能良好;迷宫形励磁绕组在原理和工艺上是可行的.对高温悬浮试验后的迷宫形绕组内部形貌进行观察后发现封装线圈的高温绝缘材料存在一定的缺陷,有待进一步研究.
- 高温磁悬浮轴承 /
- 励磁绕组 /
- 迷宫形线圈 /
- 电火花线切割 /
- 高温绝缘材料 /
- 真空钎焊
Abstract: In view of many defects and deficiencies of high temperature excitation coil at home and abroad,a new type of maze like excitation coil structure was proposed.Firstly,the monolayer maze like coil was manufactured by electric discharge machining (EDM) wire cutting,and the high temperature resistant insulating material was put into the gap of coils sufficiently and uniformly.Secondly,the vacuum soldering process was utilized to connect each layer.Finally,the packaged coils were used in a single degree-of-freedom (DOF) high temperature active magnetic bearings (HTAMB) test,and the HTAMB can achieve stable levitation for 20 hours at 550℃.The results show that the welding line resistance value is small,the shear strength of the selected solder and welding line shaped by copper parent metal are credible and coil insulation performance between turns and layers is fine in high temperature environment.Therefore,the high temperature excitation coil is feasible in theory and technology.The oxidized and impaired excitation coil internal structure caused by high temperature levitation test shows that the high temperature resistant insulating material used in encapsulated coil has certain flaws,and they need further research.
- high temperature active magnetic bearing (HTAMB) /
- excitation coil /
- maze like coil /
- electric discharge machining (EDM) wire cutting /
- high temperature resistant insulating material /
- vacuum brazing

HTML

参考文献(17)

[1]	梁春华.欧美积极开展多电发动机研究[J].国际航空,2009(5):61-63. LIANG Chunhua.More electric engines in the west[J].International Aviation,2009(5):61-63.(in Chinese)
[2]	Montague G,Jansen M,Ebihara B,et al.Design and fabrication of high-temperature radial magnetic bearing for turbomachinery[R].NASA/TM-2003-212300,2003.
[3]	Mutlu I H,Celik E,Hascicek Y S.High temperature insulation coatings and their electrical properties for HTS/LTS conductors[J].Physica C:Superconductivity,2002,370(2):113-124.
[4]	WANG Hui,XU Chuanxiang,Dang M O.Effect of organic electronic insulation material on the sustained voltage of diode at high Temperature[C]//Proceedings of International Symposium on Electrical Insulating Materials.Tokyo:IEEE,1995:101-104.
[5]	Iannello V.Magnetic bearing systems for gas turbine engines[R].Washington:MAG95,1995.
[6]	Kelleher W P,Kondoleon A S.A magnetic bearing suspension system for high temperature gas turbine application[C]//Proceedings of International Gas Turbine & Aeroengine Congress & Exhibition.Orlando.Magnetic Actuator Developemind,1997:15-24.
[7]	Scholten J R.A magnetic bearing suspension system for high temperature gas turbine application-control system design[R].Florida:ASME Turbo Expo97,1997.
[8]	徐龙祥,周波.磁浮多电航空发动机的研究现状及关键技术[J].航空动力学报,2003,18(1):51-59. XU Longxiang,ZHOU Bo.The current situation and development trend for more-electric gas turbine engines[J].Journal of Aerospace Power,2003,18(1):51-59.(in Chinese)
[9]	徐龙祥,纪历,鲁旭东.高温磁悬浮轴承励磁线圈结构及其生产方法:中国,201110190914.5[P].2012-02-22.
[10]	雍耀维.电火花切割与成型加工技术[M].北京:机械工业出版社,2007.
[11]	陈琦,彭兆弟.实用铸造手册[M].北京:中国电力出版社,2009.
[12]	成虹.冲压工艺与冲模设计[M].北京:机械工业出版社,2010.
[13]	季凌飞.激光烧结氧化物基体功能陶瓷[M].北京:化学工业出版社,2006.
[14]	李明辉,杨晓欣.数控电火花线切割加工工艺及应用[M].北京:国防工业出版社,2010.
[15]	吴小俊,童彦刚.无铅钎焊材料的研究[J].电焊机,2008,38(1):77-80. WU Xiaojun,TONG Yangang.Current research of lead-free solder [J].Electric Welding Machine,2008,38(1):77-80.(in Chinese)
[16]	王福田,王天宇.银基钎料真空钎焊效果的研究[J].电焊机,2001,31(6):31-33. WANG Futian,WANG Tianyu.Study on vacuum brazing with silver based solder[J].Electric Welding Machine,2001,31(6):31-33.(in Chinese)
[17]	金超武.高温磁悬浮轴承若干关键技术研究[D].南京:南京航空航天大学,2011. JIN Chaowu.Research on some key technologies of high temperature active magnetic bearing[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2011.(in Chinese)