基于神经网络与果蝇优化算法的涡轮叶片低循环疲劳寿命健壮性设计

周平; 白广忱

基于神经网络与果蝇优化算法的涡轮叶片低循环疲劳寿命健壮性设计

周平,
白广忱

北京航空航天大学能源与动力工程学院, 北京 100191

计量
- 文章访问数: 1955
- HTML浏览量: 152
- PDF量: 1315
- 被引次数: 0
出版历程
- 收稿日期: 2012-05-19
- 刊出日期: 2013-05-28

Robust design of turbine-blade low cycle fatigue life based on neural networks and fruit fly optimization algorithm

School of Energy and Power Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 在对涡轮叶片低循环疲劳寿命概率分析的基础上,将广义回归型神经网络(generalized regression neural network,GRNN)与果蝇优化算法(fruit fly optimization algorithm,FFOA)结合,利用果蝇优化算法的多点全局的快速搜索能力来优化影响疲劳寿命的随机变量,进行涡轮叶片低循环疲劳寿命健壮性优化设计.优化结果表明:疲劳寿命的概率区间减小17.9%,对随机变量的敏感度降低,从而可以更精确地对疲劳寿命进行估计.计算结果验证了该方法在工程应用中的可行性.
- 涡轮叶片 /
- 低循环疲劳 /
- 概率寿命 /
- 广义回归型神经网络 /
- 果蝇优化算法 /
- 健壮性
Abstract: By combining generalized regression neural network (GRNN) with fruit fly optimization algorithm (FFOA) and using FFOA multi-point global search ability to optimize the random variable which affects the fatigue life, a robust optimization design for low cycle fatigue life of turbine-blade can be made on the base of probability analysis for turbine-blade low cycle fatigue life.Optimization results show that the probability interval of fatigue life decreases 17.9%,and the sensitivity of the low cycle fatigue life of the random variable can be reduced,so the fatigue life can be estimated more accurately.Optimization results indicate that the proposed method is available and feasible for the engineering application.
- turbine-blade /
- low cycle fatigue /
- probability life /
- generalized regression neural network(GRNN) /
- fruit fly optimization algorithm(FFOA) /
- robust

HTML

参考文献(15)

[1]	陶春虎,钟培道,王仁智,等.航空发动机转动部件的失效与预防[M].北京:国防工业出版社,2001:31-67.
[2]	高阳,白广忱,于霖冲.基于RBF神经网络的涡轮盘疲劳可靠性分析[J].机械设计,2009,26(5):9-10. GAO Yang,BAI Guangchen,YU Linchong.Fatigue reliability analysis of turbine-disk based on RBF neural network[J].Journal of Machian Design,2009,26(5):9-10.(in Chinese)
[3]	段巍,赵峰.结构可靠性分析的响应面方法比较研究[J].中国工程机械学报,2009,7(4):393-396. DUAN Wei,ZHAO Fen.Comparative study on response surface methods for structural reliability analysis[J].Chinese Journal of Construction Machinery,2009,7(4):393-396.(in Chinese)
[4]	Taguchi G.Taguchi on robust technology development:bringing quality engineering upstream[M].New York:ASME Press,1993.
[5]	Ghanmi S,Bouazizi M L,Bouhaddi N.Robustness of mechanical systems against uncertainties[J].Finite Elements in Analysis and Design,2007,43(9):715-731.
[6]	朱学军,王安麟,黄洪钟.基于健壮性的机械设计方法[J].机械科学与技术,2000,19(2):230-233. ZHU Xuejun,WANG Anlin,HUANG Hongzhong.Mechanical design for robustness[J].Mechanical Science and Technology,2000,19(2):230-233.(in Chinese)
[7]	Ghanmi S,Bouazizi M L,Bouhaddi N.Robustness of mechanical systems against uncertainties[J].Finite Elements in Analysis and Design,2007,43(9):715-731.
[8]	LI Feng,MENG Guangwei,SHA Lirong,et al.Robust optimization design for fatigue life[J].Finite Elements in Analysis and Design,2011,47(10):1186-1190.
[9]	刘春涛,林志航.基于响应面和支持向量机的产品健壮设计方法[J].计算机辅助设计与图形学学报,2006,18(8):1175-1178. LIU Chuntao,LIN Zhihan.Robust design of product based on response surface and support vector machine[J].Journal of Computer-Aided Design and Computer Graphics,2006,18(8):1175-1178.(in Chinese)
[10]	闻新,周露,李翔,等.MATLAB神经网络仿真与应用[M].北京:科学出版社,2003.
[11]	Pan W T.A new fruit fly optimization algorithm:taking the financial distress model as an example[J].Knowledge Based Systems,2012,26(2):69-74.
[12]	Hohlrieder M,Irretier H.Numerical study of the fatigue life of a gas turbine blade in transient operations[R].ASME Paper 94-GT-108,1994.
[13]	艾书民,王克明,缪辉,等.稳态温度场作用下涡轮叶片振动特性的研究[J].沈阳航空航天大学学报,2011,28(4):18-21. AI Shumin,WANG Keming,MIAO Hui,et al.Research on turbine blade vibration characteristic under steady state temperature field[J].Journal of Shenyang Aerospace University,2011,28(4):18-21.(in Chinese)
[14]	王相平,徐鹤山.有限元计算中的叶片边界条件的选取[J].航空发动机,1998(4):43-46. WANG Xiangping,XU Heshan.The selection of the blade boundary conditions in finite element calculation[J].Aeroengine,1998(4):43-46.(in Chinese)
[15]	刘春涛,林志航,周春景.具有随机型和区间型干扰因素的产品健壮设计研究[J].中国机械工程,2007,18(5):505-509. LIU Chuntao,LIN Zhihang,ZHOU Chunjin.Study on product robust design with a mixture of random and interval noise factor[J].China Mechanical Engineering,2007,18(5):505-509.(in Chinese)