CCF300/QY8911单向纤维增强复合材料纵向压缩性能预测

张勇波; 傅惠民; 王治华

CCF300/QY8911单向纤维增强复合材料纵向压缩性能预测

北京航空航天大学小样本技术研究中心, 北京 100191

基金项目: 中国博士后科学基金(2011M500221);国家重点基础研究发展计划(2012CB720000)

计量
- 文章访问数: 2109
- HTML浏览量: 145
- PDF量: 1071
- 被引次数: 0
出版历程
- 收稿日期: 2012-04-25
- 刊出日期: 2013-06-28

Compressive strength prediction of CCF300/QY8911 unidirectional fiber reinforced composites

Research Center of Small Sample Technology, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 提出了一种单向纤维增强复合材料压缩性能的预测方法.该方法基于纤维增强复合材料压缩的微屈曲失效机理与纤维膝切失效机理,对CCF300/QY8911碳纤维增强复合材料单向层合板的纵向压缩性能展开研究.将纤维微屈曲失效与纤维膝切失效机理统一起来,提出一种基于两种失效机理的预测模型,很好地实现了CCF300/QY8911单向纤维增强复合材料压缩性能的预测.通过与试验数据进行比较表明:基于两种失效机理分析的CCF300/QY8911单向纤维复合材料压缩性能预测模型与试验数据符合较好,误差在5%以内.
- 纤维微屈曲 /
- 纤维膝切 /
- 预测模型 /
- 压缩性能 /
- 复合材料
Abstract: A method for the compressive strength prediction of unidirectional fiber reinforced composite was proposed. Based on the fiber microbuckling mechanism and fiber kinking mechanism, an investigation on the compressive strength prediction of CCF300/QY8911 unidirectional fiber reinforced composites was made. Combining the fiber microbuckling mechanism and fiber kinking mechanism together, which were both responsible for the failure, a combined model for compressive strength prediction of the unidirectional CCF300/QY8911 composite was proposed. According to the compression between the predicted results and measured date, it shows that to compare with the microbuckling model and the kinking model, the combined model makes a better agreement that keep the difference less than 5%.
- fiber microbuckling /
- fiber kinking /
- prediction model /
- compressive strength /
- composites

HTML

参考文献(15)

[1]	Xu Y L,Reifsnider K L.Micromechanical modeling of composite compressive strength[J].Journal of Composite Mater,1993,27(6):572-588.
[2]	Bucliansky B.Micromechanics[J].Computers & Structures,1983,16(1):3-12.
[3]	Naik N K,Kumar R S.Compressive strength of unidirectional composites:evaluation and comparison of prediction models[J].Composite Structures,1999,46(3):299-308.
[4]	Argon A S.Fracture of composite in treatise on materials science and technology[M].New York:Academic Press,1972.
[5]	Camponeschi E T,Jr.Compression of composite materials:a review[M].Washington D C:Defense Technical Information Center,1991:550-78.
[6]	Schultheisz C R,Waas A M.Compressive failure of composites:Part Ⅰ testing and micromechanical theories[J].Progress in Aerospace Sciences,1966,32(1):1-42.
[7]	Jumahat A,Soutis C,Jones F R,et al.Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composite subjected to compressive loading[J].Composite Structures,2010,92(2):295-305.
[8]	Berbinau P,Soutis C,Goutas P,et al.Effect of off-axis ply orientation on 0° fibre microbuckling[J].Composites:Part A Applied Science and Manufacturing,1999,30(10):1197-1207.
[9]	Berbinau P,Soutis C,Guz I A.Compressive failure of 0° unidirectional carbon-fibre-reinforced plastic (CFRP) laminates by fibre microbuckling[J].Composites Science and Technology,1999,59(9):1451-1455.
[10]	Guynn E G,Bradley W L,Ochoa O.A parametric study of variables that affect fibre microbuckling initiation in composite laminates:Part Ⅰ analyses[J].Journal of Composite Material,1992,26(11):1594-627.
[11]	Fleck N A,Budiansky B.Compressive failure of fibre composites due to microbuckling[C]//Inelastic Deformation of Composite Materials.New York:Springer-Verlag,1991:235-273.
[12]	Moran P,Liu L,Shih C.Kink ban formation and band broadening in fibre composites under compressive loading[J].Acta Metall & Materialia,1995,43(8):2943-2958.
[13]	Budiansky B,Fleck N A.Compressive failure of fibre composites[J].Journal of Mech Phys Solids,1993,41(1):183-211.
[14]	Chung I,Weitsman Y J.Model for the micro-buckling/micro-kinking compressive response of fibre-reinforced composites[J].Applied Mechanics Review,1994,47(6S):S256-S261.
[15]	Jumahat A,Soutis C,Jones F R,et al.Analysis of compression failure of unidirectional carbon fibre/toughened resin composites[R].Sheffield,UK:Proceedings of the 10th Conference on Deformation and Fracture of Composites (DFC10),2009.