具有凹陷涡发生器的网格冷却结构内的流动与传热特性

张翔; 饶宇

具有凹陷涡发生器的网格冷却结构内的流动与传热特性

张翔,
饶宇

上海交通大学机械与动力工程学院叶轮机械研究所, 上海 200240

基金项目: 国家自然科学基金(51176111)

计量
- 文章访问数: 1605
- HTML浏览量: 6
- PDF量: 1115
- 被引次数: 0
出版历程
- 收稿日期: 2012-07-06
- 刊出日期: 2013-07-28

Flow and heat transfer characteristics in latticework cooling structure with dimple vortex generators

ZHANG Xiang,
RAO Yu

Turbo Machinery Institute, School of Mechanical and Power Engineering, Shanghai Jiaotong University, Shanghai 200240, China

摘要

摘要: 对一种具有U 形子通道以及凹陷涡发生器的新型网格冷却结构内的流动和传热特性进行了实验和数值计算研究,通过数值计算可以较准确地获得网格冷却结构的传热性能和流阻性能.在数值计算模型得到验证的基础上,还分别对具有U 形子通道和凹陷涡发生器的网格冷却结构,以及具有U 形和矩形子通道的网格冷却结构内的流动和传热性能进行了对比研究.对比研究表明:与矩形子通道相比,U 形子通道结构能够改善子通道底部的流动状况,降低流动阻力,但同时也略微降低了总体传热性能;在U 形子通道壁面上布置凹陷涡发生器能够显著增强底部流动扰动,大幅提高传热性能,但同时也增加了流动阻力.
- 涡轮叶片 /
- 网格冷却 /
- 传热 /
- 流动阻力 /
- 凹陷
Abstract: The flow and heat transfer characteristics in the latticework cooling structure with U shaped sub-channels combined with dimple vortex generators were studied experimentally and numerically,the numerical computation model could reasonably predict the heat transfer and pressure loss in the latticework cooling channels.Based on the satisfactory validation of numerical computation,a comparative numerical investigation was made on the flow and heat transfer in the latticework cooling structures with three sub-channel configurations:U shaped sub-channels with dimples,U shaped sub-channels and rectangular sub-channels.The computational results show that,as compared to the case of rectangular sub-channel,U shaped sub-channels could improve the flow capability in the bottom of the sub-channels,helping to reduce the flow resistance while decreasing the heat transfer slightly.The Dimples arranged in the U sub-channels distinctively increased the turbulent mixing in the bottom flow,thereby significantly enhancing the convective heat transfer while increasing the flow resistance in the cooling channels.
- turbine blade /
- latticework cooling /
- heat transfer /
- flow resistance /
- dimple

HTML

参考文献(20)

[1]	曹玉璋,陶智,徐国强,等.航空发动机传热学[M].北京:北京航空航天大学出版社,2005.
[2]	Han J C,Chen H C.Turbine blade internal cooling passages with ribs turbulator[J].AIAA Journal of Propulsion and Power,2006,22(2):226-248.
[3]	Armstrong J,Winstanley D.A review of staggered array pin fin heat transfer for turbine cooling application[J].Journal of Turbomachinery,1988,110(1):94-103.
[4]	Chyu M K.Recent advances in turbine heat transfer with a view of transition to coal-gas based systems[J].Journal of Heat Transfer,2012,134(3):031006.1-031006.9
[5]	RAO Yu,WAN Chaoyi,XU Yamin.An experimental study of pressure loss and heat transfer in the pin fin-dimple channels with various dimple depths[J].International Journal of Heat and Mass Transfer,2012,55(23/24):6723-6733.
[6]	RAO Yu,ZHANG Xiang,WAN Chaoyi.Pressure loss and heat transfer in channels with pin-fin dimple combined arrays for gas turbine cooling application [R].ACGT2012-4095,2012.
[7]	Han B,Goldstein R J.Jet impingement heat transfer in gas turbine systems[J].Annals of the New York Academy of Sciences,2001,934(1):147-161.
[8]	Ligrani P M,Oliveira M M,Blaskovich T.Comparison of heat transfer augmentation techniques[J].AIAA Journal,2003,41(3):337-362.
[9]	Bunker R S.Latticework (vortex) cooling effectiveness:Part 1 stationary channel experiments [R].ASME Paper,GT-2004-54157,2004.
[10]	Nagoga G P.Effective methods of cooling of blades of high temperature gas turbine [R].Moscow:Publishing House of Moscow Aerospace Institue Gas Turbine,1996.
[11]	Acharya S,Zhou F,Lagrone J,et al.Latticework (vortex) cooling effectiveness:Part 2 rotating channel experiments[J].Journal of Turbomachinery,2005,127(3):471-478.
[12]	Oh I T,Kim K M,Lee D H,et al.Local heat/mass transfer and friction loss measurement in a rotating matrix cooling channel[J].Journal of Heat Transfer,2012,134(1):0119011-0119019.
[13]	张勃,吉洪湖,张靖周,等.网格式肋化通道换热与总压损失特性研究[J].航空动力学报,2004,19(2):201-205. ZHANG Bo,JI Honghu,ZHANG Jingzhou,et al.Experimental study of heat transfer and total pressure drop of a grid-ribbed rectangular channel[J].Journal of Aerospace Power,2004,19(2):201-205.(in Chinese)
[14]	刘庆东,秦岭.交错肋结构形式对换热和流阻特性的影响试验研究[J].航空发动机,2007,33(4):36-39. LIU Qingdong,QING Ling.Experimental investigation of heat tranfer and flow resistance characteristics on crossed-rib configuration[J].Aeroengine,2007,33(4):36-39.(in Chinese)
[15]	丁水汀,秦岭,邓宏武,等.交错肋通道换热和流阻特性的研究[J].航空动力学报,2007,22(2):205-209. DING Shuiting,QING Ling,DENG Hongwu,et al.Experimental investigation of heat transfer and flow resistance in a crossed-rib channel[J].Journal of Aerospace Power,2007,22(2):205-209.(in Chinese)
[16]	邓宏武,潘文艳,陶智,等.开槽交错肋通道换热和流阻特性[J].北京航空航天大学学报,2007,33(10):1158-1161. DENG Hongwu,PAN Wenyan,TAO Zhi,et al.Heat transfer and flow resistance in a notched crossed-rib channel[J].Journal of Beijing University of Aeronautics and Astronautics,2007,33(10):1158-1161.(in Chinese)
[17]	邓宏武,谭艳,王佳仁,等.带交错肋结构涡轮叶片复合通道的实验[J].航空动力学报,2010,25(9):1931-1937. DENG Hongwu,TAN Yan,WANG Jiaren,et al.Wxperimental study on the turbine blade cooling channel with crossed-ribs[J].Journal of Aerospace Power,2010,25(9):1931-1937.(in Chinese)
[18]	Dittus F W,Boelter L M K.Publications on engineering[M].California:University of California Press,1930.
[19]	Kays W M,Crawford,M.E.Convective heat and mass transfer[M].3rd ed.New York:McGraw Hill,1993.
[20]	Han J C,Park J S,Lei C K.Heat transfer enhancement in channels with turbulence promoters[J].Journal of Engineering for Gas Turbines and Power,1985,107(3):628-635.