基于响应面法的可靠性稳健设计优化

彭茂林; 杨自春; 曹跃云; 初珠立

基于响应面法的可靠性稳健设计优化

海军工程大学动力工程学院, 武汉 430033

基金项目: 海军工程大学博士研究生创新基金

计量
- 文章访问数: 1397
- HTML浏览量: 8
- PDF量: 1067
- 被引次数: 0
出版历程
- 收稿日期: 2012-08-06
- 刊出日期: 2013-08-28

Reliability robust design optimization based on response surface method

School of Power Engineering, Naval University of Engineering, Wuhan 430033, China

摘要

摘要: 针对极限状态函数和结构性能函数为隐式的结构可靠性稳健设计优化问题,将结构性能稳健性、可靠性灵敏度稳健性与6σ稳健设计思想相结合,建立了一种基于响应面法的可靠性稳健设计优化模型并给出了具体算法.采用多项式拟合结构性能函数和极限状态函数,推导了基于响应面函数的1阶可靠度指标以及性能函数均值和均方差的计算方程;将结构可靠度作为基本约束条件,采用序列二次规划法得到稳健设计优化结果.运用该方法对某涡轮叶片型线进行设计优化,经过优化后,静、动叶的动能效率均值分别提高1.5%和6.4%,动叶片最大应力均值下降7.9%,动叶叶身最大变形均值下降5.6%,动叶片结构强度可靠度由初始的91.3%提高到了99.9%.
- 稳健设计 /
- 响应面法 /
- 可靠性 /
- 涡轮叶片 /
- 设计优化
Abstract: To solve the problem of reliability robust design optimization of structure with implicit limit state functions and limit output performance functions,the robustness of the performance,reliability sensitivity robust and six sigma robust design were integrated,and a reliability robust design optimization model based on response surface method was presented involving the detailed calculation processes of the method.The second-degree polynomials were introduced to simulate the output performance functions and the limit state functions of the structure.The equations of the first order reliability index,the mean value and the standard deviation of the structure were calculated based on the response function.Then taking the structural reliability as the basic constraint condition,the final optimization result with the sequential quadratic programming method was obtained.Finally the example was introduced to explain and validate the model.The method was used to design the model lines of a gas turbine blade.After design optimization,the results indicate that the aerodynamic efficiencies of the guide blade and working blade increase by 1.5% and 6.4% respectively,and the maximum stress and the maximum strain of the working blade decrease by 7.9% and 5.6% respectively.The intensity structural reliability of the working blade increases from 91.3% to 99.9%.
- robust design /
- response surface method /
- reliability /
- turbine blade /
- design optimization

HTML

参考文献(16)

[1]	贺谦,李元生,温志勋.涡轮叶片多学科可靠性及稳健设计优化[J].推进技术,2010,31(2):193-197. HE Qian,LI Yuansheng,WEN Zhixun.Multidisciplinary probabilistic and robust design optimization for turbine blade[J].Journal of Propulsion Technology,2010,31(2):193-197.(in Chinese)
[2]	李峰,孟广伟,周振平.结构疲劳寿命稳健性设计优化[J].机械工程学报,2010,46(2):155-158. LI Feng,MENG Guangwei,ZHOU Zhenping.Robust design optimization of structural fatigue life[J].Chinese Journal of Mechanical Engineering,2010,46(2):155-158.(in Chinese)
[3]	Lee I,Choia K K,Du L,et al.Dimension reduction method for reliability-based robust design optimization[J].Computers & Structures,2008,86(13):1550-1562.
[4]	张义民,高娓,宋相强,等.具有应力集中的机械零件可靠性稳健设计[J].工程力学,2008,25(11):237-240. ZHANG Yimin,GAO Wei,SONG Xiangqiang,et al.Reliability-based robust design for mechanical components with stress concentrations[J].Engineering Mechanics,2008,25(11):237-240.(in Chinese)
[5]	贺向东,张义民,闻邦椿.压杆稳定可靠性稳健设计[J].强度与环境 2007,34(1):59-64. HE Xiangdong,ZHANG Yimin,WEN Bangchun.Reliability-based robust design of compressive bar[J].Structrue & Environment Engineering,2007,34(1):59-64.(in Chinese)
[6]	宋保维,刘旭琳,王金华.基于灵敏度分析的鱼雷联接结构稳健设计[J].系统仿真学报,2009,21(9):2746-2748. SONG Baowei,LIU Xulin,WANG Jinhua.Robust optimization design on sensitivity analysis for wedge ring connection structure of torpedo[J].Journal of System Simulation,2009,21(9):2746-2748.(in Chinese)
[7]	李永华.稳健可靠性理论及优化方法研究 [D].大连:大连理工大学,2005. LI Yonghua.Robust reliability theory and optimization methods [D].Dalian:Dalian University of Technology,2005.(in Chinese)
[8]	李玉强,崔振山,陈军.基于响应面模型的6σ稳健设计方法[J].上海交通大学学报,2006,40(2):201-205. LI Yuqiang,CUI Zhenshan,CHEN Jun.Six sigma robust design methodology based on response surface model[J].Journal of Shanghai Jiaotong University,2006,40(2):201-205.(in Chinese)
[9]	李玉强,崔振山,陈军.基于双响应面模型的6σ稳健设计[J].机械强度,2006,28(5):690-694. LI Yuqiang,CUI Zhenshan,CHEN Jun.Six sigma robust design methodology based on dual response surface model [J].Journal of Mechanical Strength,2006,28(5):690-694. (in Chinese)
[10]	Yeniay O,Unal R,Lepsch R A.Using dual response surfaces to reduce variability in launch vehicle design:a case study[J].Reliability Engineering and System Safety,2006, 91(4):407-412.
[11]	Liu D,Lai X,Ni J,et al.Robust design of assembly parameters on membrane electrode assembly pressure distribution[J].Journal of Power Sources,2007,172(2):760-767.
[12]	宗志宇.基于RSM的多响应稳健性设计方法的研究 [D].天津:天津大学,2007. ZONG Zhiyu.Study on multi-response robust design based on RSM [D].Tianjin:Tianjin University,2007.(in Chinese)
[13]	王晶.基于响应曲面法的多响应稳健性参数优化方法研究 [D].天津:天津大学,2009. WANG Jing.Robust parameter optimization for multi-response using response surface methodology [D].Tianjin:Tianjin University,2009.(in Chinese)
[14]	谢延敏.基于Kriging模型和灰色关联分析的板料成形工艺稳健设计优化研究 [D].上海:上海交通大学,2007. XIE Yanmin.Research on robust optimization of sheet metal forming based on Kriging and grey relational analysis [D].Shanghai:Shanghai Jiaotong University,2007.(in Chinese)
[15]	安伟光,蔡荫林,陈卫东.随机结构系统可靠性分析与优化[M].哈尔滨:哈尔滨工程大学出版社,2007.
[16]	秦权,林锦道,梅刚.结构可靠度随机有限元:理论及工程应用[M].北京:清华大学出版社,2006.