[1] |
Nealy D A, Reider S B.Evaluation of laminated porous wall materials for combustor liner cooling[J].Journal of Engineering for Power, 1980, 102(2):268-276.
|
[2] |
Mongia H C, Reider S B.Allison combustion research and development activities[R].AIAA 85-1402, 1985.
|
[3] |
Wassell A B, Bhangu J K.The development and application of improved combustor wall cooling techniques[R].ASME Paper 80-GT-66, 1980.
|
[4] |
Rolls Royce Aerospace Group.The jet engine[M].[S.l.]:Rolls Royce Group Publishing Company, 1986.
|
[5] |
George D B, Brown B T, Cox A R.The application of rapid solidification rate superalloys to radial wafer turbine blades[R].AIAA 79-1226, 1979.
|
[6] |
Vershure R W Jr.Engine demonstration testing of a cooled laminated axial turbine[J].AIAA 79-1229, 1979.
|
[7] |
Funazaki K, Hachiya K.Systematic numerical studies on heat transfer and aerodynamic characteristics of impingement cooling devices combined with pins[R].ASME Paper 2003-GT-38256, 2003.
|
[8] |
Funazaki K, Tarukawa Y, Kudo T, et al.Heat transfer characteristics of an integrated cooling configuration of ultra-high temperature turbine blades:experimental and numerical investigations[R].ASME Paper 2001-GT-0148, 2001.
|
[9] |
Hong S K, Rhee D H, Cho H H.Heat/mass transfer with circular pin fins in impingement/effusion cooling system with crossflow[J].Journal of Thermophysics and Heat Transfer, 2006, 20(4):728-737.
|
[10] |
Coutandin D, Taddei S, Facchini B.Advanced double-wall cooling system development for turbine vanes[C]//ASME Turbo Expo 2006:Power for Land, Sea, and Air.Barcelona, Spain:American Society of Mechanical Engineers, 2006:623-632.
|
[11] |
QUAN Dongliang, LIU Songling, LI Jianghai, et al. Cooling performance of an impingement cooling device combined with pins[J].Journal of Thermal Science, 2005, 14(1):56-61.
|
[12] |
QUAN Dongliang, YU Xinhua, LIU Songling, et al.Experimental and numerical investigation of internal flow resistance characteristics in laminate porous plates[J].Journal of Propulsion Technology, 2003, 24(5):425-428.(in Chinese)
|
[13] |
YU Xinhua, QUAN Dongliang, LIU Songling, et al.Investigation of the internal heat transfer characteristics of lamilloy[J].Acta Aeronautica et Astronautica Sinica, 2003, 24(5):405-410.(in Chinese)
|
[14] |
QUAN Dongliang, LIU Songling, LI Jianghai, et al.Experimental and numerical investigation of the cooling characteristics in a laminate porous plate[J].Journal of Propulsion Technology, 2004, 25(2):134-138.(in Chinese)
|
[15] |
QUAN Dongliang, LIU Songling, LI Jianghai, et al.Experimental investigation of cooling effectiveness of laminate porous plates[J].Journal of Aerospace Power, 2004, 19(4):520-524.(in Chinese)
|
[16] |
TAO Zhi, WEI Haojie, DING Shuiting, et al.Experimental investigation of flow resistance and heat transfer characteristics of typical lamilloy models[J].Journal of Aerospace Power, 2007, 22(2):193-198.(in Chinese)
|
[17] |
LÜ Dong, TAO Zhi, DENG Hongwu, et al.Performance evaluation and comparison of 2 porous laminated plates[J].Journal of Beijing University of Aeronautics and Astronautics, 2008, 34(5):546-550.(in Chinese)
|
[18] |
WANG Jiahua, LÜ Xijia, LIU Qingdong, et al.An experimental investigation on cooling performance of a laminated configuration using infrared thermal image technique[R].ASME Paper GT2009-59838, 2009.
|
[19] |
WANG Jianhua, XU Huazhao, LÜ Xijia.A numerical investigation on fluid-thermal-structure coupling characteristics of laminated film cooling configurations[R].ASME Paper GT2009-59604, 2009.
|
[20] |
LU Yuanli, WANG Ming, JI Honghu, et al.Effect of pin-fin on heat transfer of leading edge for laminated plate cooling blade[J].Aeroengine, 2013, 39(2):57-61.(in Chinese)
|
[21] |
WANG Ming, LU Yuanli, JI Honghu.Numerical investigation on the influences of impingement holes on heat transfer of leading edge in lamilloy[J].Journal of Aerospace Power, 2013, 28(10):2240-2247.(in Chinese)
|