Mechanism motion reliability calculation method considering correlative multi-failure modes
-
摘要: 机构运动中必然存在多种相关失效模式,多为影响机构运动的各类随机变量函数.为了在机构运动可靠性分析中有效考虑多种相关失效模式的影响,建立了考虑多种失效模式相关条件下的机构运动可靠度计算模型,并实现了对多种失效模式相关条件下的机构运动可靠度计算模型的求解,为考虑多种相关失效模式下的机构运动可靠性分析提供了一种有效途径.以6408滚动轴承为例,进行100000抽样计算,考虑失效模式相关条件下运动可靠度为95.9989%.该方法精度较高,具有一定的理论意义和应用价值.
-
关键词:
- 随机误差 /
- 相关失效模式 /
- 机构运动可靠性 /
- 可靠度 /
- MonteCarlo法
Abstract: There exists inevitably correlative multi-failure modes in a mechanism motion process; in most cases, they were described as random error functions. In order to analyze effectively these influences of correlative multi-failure modes on mechanism motion, a motion reliability calculation model was built by taking these multi-failure modes into account, and then the mechanism reliability results could be solved by this model. Taking type 6408 ball bearing as an example, the motion reliability value was 95.9989% after 100000 times sampling calculations. It showed that this method has high accuracy and is helpful to the theroretical research and practical applications. -
[1] 闫明,张义民,孙志礼.机械零件相关失效可靠度及灵敏度计算的Monte Carlo方法[J].东北大学学报,2011,32(6):835-837. YAN Ming,ZHANG Yimin,SUN Zhili.Monte Carlo method for computing of reliability and sensitivity of mechanical components with dependent failure modes[J].Journal of Northeastern University,2011,32(6):834-837.(in Chinese) [2] 喻天翔,宋笔锋.机械零件多失效模式相关可靠度算法研究[J].机械强度,2006,28(4):508-511. YU Tianxiang,SONG Bifeng.Research on calculating the reliability of mechanical component with correlated failure modes[J].Journal of Mechanical Strength,2006,28(4):508-511.(in Chinese) [3] 孙志礼,赵乃素.多种失效形式时机械零件的可靠度计算[J].东北工学院学报,1993,14(1):60-63. SUN Zhili,ZHAO Naisu.Reliability calculation of a machine component failed in different modes[J].Journal of Northeast University of Technology,1993,14(1):60-63.(in Chinese) [4] 孙志礼,陈良玉.实用机械可靠性设计理论与方法[M].北京:科学出版社,2003. [5] 喻天翔.多模式失效的机械零件可靠度计算新理论[J].机械工程学报,2003,39(3):135-137. YU Tianxiang.Reliability computing new theory of mechanical elements with multi failure mode[J].Chinese Journal of Mechanical Engineering,2003,39 (3):134-137.(in Chinese) [6] 陈卫平,张云清,任卫群.机械系统动力学分析及ADAMS应用教程[M].北京:清华大学出版社,2005. [7] 周金宇,谢里阳,王学敏.失效相关结构系统可靠性分析及近似求解[J].东北大学学报,2004,25(1):74-77. ZHOU Jinyu,XIE Liyang.WANG Xuemin.Approximate method to reliability prediction of failure dependent system[J].Journal of Northeastern University,2004,25(1):74-77.(in Chinese) [8] 刘维信.机械可靠性设计[M].北京:清华大学出版社,1995. [9] 武清玺.结构可靠性分析及随机有限元法:理论、方法、工程应用及程序设计[M].北京:机械工业出版社,2005. [10] Hassan M.Investigation of high-velocity impact on integral armor using finite element method[J].International Journal Impact Engineering,2004,24(2):203-217. [11] 李昌.基于响应面法齿轮啮合传动可靠性灵敏度分[J].航空动力学报,2011,26(3):711-715. LI Chang.Analysis of reliability sensitivity for gear engagement based on response surface methods[J].Journal of Aerospace Power,2011,26(3):711-715.(in Chinese) [12] 李昌,韩兴,孙志礼.基于机构运动精度可靠性虚拟实验方法研究[J].机械设计,2007,24(11):17-20. LI Chang,HAN Xing,SUN Zhili.Reliability virtual test of mechanism motion accuracy[J].Journal of Machine Design,2007,24(11):17-20.(in Chinese) [13] 郑建荣.ADAMS—虚拟样机技术入门与提高[M].北京:机械工业出版社,2002. [14] Merlet J P,Daney D.Dimensional synthesis of parallel robots with a guaranteed given accuracy over a specific workspace//Proceeding of the 2002 IEEE International Conference on Robotics & Automation.Barcelona,Spain:IEEE,2005:942-947. [15] 安伟光,蔡荫林.随机结构系统可靠性分析与优化设计[M].哈尔滨:哈尔滨工程大学出版社,2005. [16] 李永东.某型坦克齿轮接触疲劳强度可靠性的Monte Carlo数值模拟[J].机械强度,2006,28(1):46-50. LI Yongdong.Monte Carlo numerical modeling of a tank gear's contact fatigue strength reliability[J].Journal of Mechanical Strength,2006,28(1):46-50.(in Chinese) [17] 朱文予.机械可靠性设计[M].上海:上海交通大学出版社,1992. [18] 侯红玲,赵永强,魏伟峰.基于ADAMS的平面连杆机构运动分析与仿真[J].机械,2005(1):33-35. HOU Hongling,ZHAO Yongqiang,WEI Weifeng.Dynamic analysis and simulation of the planar linkage in ADAMS[J].Mechanic,2005(1):33-35.(in Chinese)
点击查看大图
计量
- 文章访问数: 1342
- HTML浏览量: 2
- PDF量: 820
- 被引次数: 0