Numerical investigation of windage heating within shrouded rotor-stator cavity system with central inflow
doi: 10.13224/j.cnki.jasp.2014.10.017
Numerical investigation of windage heating within shrouded rotor-stator cavity system with central inflow
-
摘要: The rotating disk surface temperature rise due to windage heating effect by numerically modeling the turbulent flow within a rotor-stator cavity which is available with a peripheral shroud and imposed through airflow was dealt with. The windage heating may be defined as viscous friction heating caused by relative velocity differences across the boundary layers between the fluid and the rotating disk surface. The kinetic energy dissipation process could transform the rotating shaft power into thermal heating. Commercial finite volume based solver, ANSYS/CFX was employed to numerically simulate this physical process by using the shear stress transport (SST) turbulence model. CFD results include the rotating disk surface temperature axial distribution and tangential velocity distribution of the fluid domain. The velocity difference between the result obtained by particle image velocimetry (PIV) experiments and CFD simulation are within 5%. The adiabatic disk temperature rise can be calculated by the tangential velocity of disk and fluid in large gap ratio and turbulent parameter. CFD temperature distribution results and those estimated via velocity differences are within 10%.Abstract: The rotating disk surface temperature rise due to windage heating effect by numerically modeling the turbulent flow within a rotor-stator cavity which is available with a peripheral shroud and imposed through airflow was dealt with. The windage heating may be defined as viscous friction heating caused by relative velocity differences across the boundary layers between the fluid and the rotating disk surface. The kinetic energy dissipation process could transform the rotating shaft power into thermal heating. Commercial finite volume based solver, ANSYS/CFX was employed to numerically simulate this physical process by using the shear stress transport (SST) turbulence model. CFD results include the rotating disk surface temperature axial distribution and tangential velocity distribution of the fluid domain. The velocity difference between the result obtained by particle image velocimetry (PIV) experiments and CFD simulation are within 5%. The adiabatic disk temperature rise can be calculated by the tangential velocity of disk and fluid in large gap ratio and turbulent parameter. CFD temperature distribution results and those estimated via velocity differences are within 10%.
-
Key words:
- windage heating /
- rotor-stator cavity system /
- flow structure /
- recovery temperature /
- gap ratio
-
[1] Daily J W,Nece R E.Chamber dimension effects on induced flow and frictional resistance of enclosed rotating disks[J].Journal of Basic Engineering,1960,82(1):217-230. [2] Bayley F J,Owen J M.The fluid dynamics of a shrouded disk system with a radial outflow of coolant[J].Journal of Engineering for Power,1970,92(3):335-341. [3] Owen J M.The effect of forced flow on heat transfer from a disc rotating near a stator[J].International Journal of Heat and Mass Transfer,1971,14(8):1135-1147. [4] Bayley F J,Owen J M.Flow between a rotating and a stationary disc[J]. Aeronautical Quarterly,1969,20:333-354. [5] Owen J M,Haynes C M,Bayley F J.Heat transfer from an air-cooled rotating disk[J].Journal of Mathematical and Physical Science,1974,336(1607):453-473. [6] Bayley F J,Long C A,Turner A B.Discs and drums:the thermo-fluid dynamics of rotating surfaces[J].Journal of Mechanical and Engineering Science,1993,207(2):73-81. [7] Coren D,Childs P R N,Long C A.Windage sources in smooth-walled rotating disc systems[J].Journal of Mechanical Engineering Science,2009,223(4):873-888. [8] Childs P R N,Noronha M B.The impact of machining techniques on centrifugal compressor impeller performance[J].Journal of Turbomachinery,1999,121(4):637-643. [9] Liu H P,Werst M,Hahne J J,et al.Prediction of windage losses of an enclosed high speed composite rotor in low air pressure environments[R].ASME Paper HT2003-47118,2003. [10] Da Soghe R,Facchini B,Innocenti L,et al.Analysis of gas turbine rotating cavities by an one-dimensional model[R].ASME Paper GT2009-59185,2009. [11] Childs P.Flow in rotating components-discs,cylinders and cavities[R].Denver:IHS Global,2007. [12] Poncet S,Chauve M P,Schiestel R.Batchelor versus Stewartson flow structures in a rotor-stator cavity with throughflow[J].Physics of Fluids,2005,17(7):075110.1-075110.15. [13] Batchelor G K.Note on the class of solutions of the Navier-Stokes equations representing steady rotationally symmetric flow[J].Quarterly Journal of Mechanics and Applied Mathematics,1951,4(1):29-41. [14] Lewis L V.In-engine measurements of temperature rises in axial compressor shrouded stator cavities[R].ASME Paper GT2002-30245,2002. [15] Lewis L V,Provins J I.A non-coupled CFD-FE procedure to evaluate windage and heat transfer in rotor-stator cavities[R].ASME Paper GT2004-53246,2004. -
点击查看大图
计量
- 文章访问数: 1356
- HTML浏览量: 2
- PDF量: 760
- 被引次数: 0
下载: