铝锂合金喷丸强化数值模拟及试验

王永军; 孙宝龙; 张炜; 高国强; 乔明杰

doi:10.13224/j.cnki.jasp.2015.03.010

铝锂合金喷丸强化数值模拟及试验

doi: 10.13224/j.cnki.jasp.2015.03.010

1. 西北工业大学机电学院, 西安 710072;
2. 中国航空工业集团公司中航飞机股份有限公司西安飞机分公司, 西安 710089

基金项目:

国家自然科学基金(51275420)

详细信息

作者简介:
王永军(1968-),男,黑龙江哈尔滨人,副教授,博士,主要研究方向为先进钣金成形工艺及装备、先进复合材料成形工艺及装备技术.wyongjun@nwpu.edu.cn

中图分类号: V261;TG178
计量
- 文章访问数: 1387
- HTML浏览量: 117
- PDF量: 836
- 被引次数: 0
出版历程
- 收稿日期: 2013-10-28
- 刊出日期: 2015-03-28

Numerical simulation and experiment on shot peening of Al-Li alloy

1. School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072;
2. Xi'an Aircraft Industry Company, Aircraft Company Limited, Aviation Industry Corporation of China, Xi'an 710089, China

摘要

摘要: 根据喷丸强化工艺过程的特点,利用ABAQUS有限元计算软件建立了模拟喷丸残余应力场的三维有限元模型.在此模型基础上研究了喷丸速度、弹丸直径及弹丸数量等因素对铝锂合金喷丸残余应力场的影响规律,进而对比了单弹丸模型、均布式阵列弹丸模型和随机弹丸模型下残余应力场的分布规律.采用X射线残余应力仪和电解抛光法得到喷丸强化后沿铝锂合金试件厚度方向的残余应力分布规律.残余应力层深度约为0.24mm,最大残余应力出现在距表面深度为0.08mm处,验证了有限元模型的有效性.
- 铝锂合金 /
- 喷丸强化 /
- 有限元模拟 /
- 残余应力 /
- 弹丸模型
Abstract: According to the characteristics of shot peening process, a three-dimensional finite element model was established by using ABAQUS finite element software to simulate the residual stress field. Based on this model, the effects of shot parameters such as velocity, diameter and shot number on residual stress field of Al-Li alloy were studied respectively. Then the distributions of the residual stress field of single shot model, uniform array shots model and random shot model were compared. Furthermore, the residual stress distribution in Al-Li alloy specimen thickness direction was measured by using X-ray residual stress analyzer and electrolytic polishing method. The depth of residual stress layer is 0.24mm. The maximum residual stress occurs at the depth of 0.08mm. It verifies the validity of the finite element model.
- Al-Li alloy /
- shot peening /
- finite element simulation /
- residual stress /
- shot model

HTML

参考文献(19)

[1]	霍红庆,郝维新,耿桂宏,等.航天轻型结构材料铝锂合金的发展[J].真空与低温,2005,11(2):63-69. HUO Hongqing,HAO Weixin,GENG Guihong,et al.Development of the new aerocraft material aluminum-lithium alloy[J].Vacuum and Cryogenics,2005,11(2):63-69.(in Chinese)
[2]	周昌荣,潘青林,朱朝明,等.新型铝锂合金的研究和发展[J].材料导报,2004,18(5):30-32. ZHOU Changrong,PAN Qinglin,ZHU Chaoming,et al.Development and study of new types aluminum-lithium alloy[J].Materials Review,2004,18(5):30-32.(in Chinese)
[3]	郑子樵,李劲风,陈志国,等.铝锂合金的合金化与微观组织演化[J].中国有色金属学报,2011,21(10):2337-2351. ZHENG Ziqiao,LI Jinfeng,CHEN Zhiguo,et al.Alloying and microstructural evolution of Al-Li alloys[J].The Chinese Journal of Nonferrous Metals,2011,21(10):2337-2351.(in Chinese)
[4]	王齐栓,张九强.喷丸强化在模具表面处理中的应用[J].漯河职业技术学院学报,2009,8(5):21-22. WANG Qishuan,ZHANG Jiuqiang.Surface treatment application of shot peening in moulds[J].Journal of Luohe Vocational Technology College,2009,8(5):21-22.(in Chinese)
[5]	栾伟玲,涂善东.喷丸表面改性技术的研究进展[J].中国机械工程,2005,16(15):1405-1409. LUAN Weiling,TU Shandong.Recent trends on surface modification technology of shot peening[J].China Mechanical Engineering,2005,16(15):1405-1409.(in Chinese)
[6]	王梅,陆山,古远兴,等.喷丸强化对TC11合金模拟叶片高周疲劳寿命影响的试验[J].航空动力学报,2013,28(3):507-512. WANG Mei,LU Shan,GU Yuanxing,et al.Experiment of effect of shot peening strengthening on TC11 alloy simulation blade's HCF life[J].Journal of Aerospace Power,2013,28(3):507-512.(in Chinese)
[7]	Meguid S A,Shagal G,Stranart J C.Three-dimentional dynamic finite element analysis of shot-peening induced residual stresses[J].Finite Element in Analysis and Design,1999,31(3):179-191.
[8]	Meguid S A,Klair M S.An examination of the relevance of coindentation studies to incomplete coverage in shot peening using the finite element method[J].Journal of Mechanics of Working Technology,1985,11(1):87-104.
[9]	Baragetti S.Three-dimension finite element procedures for shot-peening residual stress field prediction[J].International Journal of Computer Applications in Technology,2001,14(1):51-63.
[10]	Baragetti S,Guallano M,Vergani L.A numerical procedure for shot peening optimization by means of non-dimensional factors[J].International Journal of Material and Product Technology,2000,15(1):91-103.
[11]	Majzoobi G H,Azizi R,Alavi Nia A.A three-dimensional simulation of shot peening process using multiple shot impacts[J].Journal of Materials Processing Technology,2005,164/165(1):1226-1234.
[12]	Majzoobi G H,Azadikhah R,Nemati J.The effects of deep rolling and shot peening on fretting fatigue resistance of aluminum-7075-T6[J].Materials Science and Engineering,2009,516(1):235-247.
[13]	Miao H Y,Larose S,Perron C.On the potential application of a 3D random finite element model for the simulation of shot peening[J].Advances in Engineering Software,2009,40(10):1023-1038.
[14]	凌祥,彭薇薇,倪红芳.喷丸三维残余应力场的有限元模拟[J].机械工程学报,2006,42(8):182-189. LING Xiang,PENG Weiwei,NI Hongfang.Simulation of 3D residual stress field of shot peening by dynamic finite element analysis[J].Chinese Journal of Mechanial Engineering,2006,42(8):182-189.(in Chinese)
[15]	张洪伟,张以都,吴琼.喷丸强化残余应力场三维数值分析[J].航空动力学报,2010,25(3):603-609. ZHANG Hongwei,ZHANG Yidu,WU Qiong.Three dimensional numerical analysis of residual stress field for shot peening[J].Journal of Aerospace Power,2010,25(3):603-609.(in Chinese)
[16]	李源,雷丽萍,曾攀.弹丸束喷丸有限元模型数值模拟及试验研究[J].机械工程学报,2011,47(22):43-48. LI Yuan,LEI Liping,ZENG Pan.Shot stream finite element model for shot peening numerical simulation and its experiment study[J].Chinese Journal of Mechanial Engineering,2011,47(22):43-48.(in Chinese)
[17]	Kim T,Lee J H,Lee H,et al.An area-average approach to peening residual stress under multi-impacts using a three-dimensional symmetry-cell finite element model with plastic shots[J].Materials and Design,2010,31(1):50-59.
[18]	李源,雷丽萍,曾攀.基于静力等效的喷丸工艺数值模拟[J].塑性工程学报,2011,18(3):70-74. LI Yuan,LEI Liping,ZENG Pan.The numerical simulation of shot peening process with an equivalent static loading method[J].Journal of Plasticity Engineering,2011,18(3):70-74.(in Chinese)
[19]	Miao H Y,Larose S,Perron C,et al.An analytical approach to relate shot peening parameters to Almen intensity[J].Surface and Coatings Technology,2010,205 (7):2055-2066.