Internal ballistic simulation of multi-burning-rate solid rocket motor based on parameterized feature CAD model
doi: 10.13224/j.cnki.jasp.2015.12.027
Internal ballistic simulation of multi-burning-rate solid rocket motor based on parameterized feature CAD model
-
摘要: Internal ballistic simulation (IBS) method of multi-burning-rate solid rocket motor (SRM) was developed based on 3-D burning regression method by parameterized feature CAD model (PFCADM) and lumped parameter, in consideration of time-dependent, erosive-burning-effect from internal ballistic numerical algorithm. By driving multi-parameter CAD model based on PFCADM, the approach is capable of conducting the geometric regression simulation of various grain combinations of complex configurations with different burning rates. Through suitably simplifying the internal ballistic numerical algorithm, the problems of coupling geometric regression simulation of sub-grains of different burning rates and high computational consumption of internal ballistic calculation were solved. One tri-burning-rate grain motor, which had been firing-tested, was used as the validation case of simulation. The results show that, with the 3-D grain regression model and sufficient accurate internal ballistic algorithm, the method realizes IBS of the case in low computational-consumption prediction of its performance within the accuracy of 2% during 1h clock-time. The application of the method provides a practical approach to aid SRM design of multi-burning-rate grain.Abstract: Internal ballistic simulation (IBS) method of multi-burning-rate solid rocket motor (SRM) was developed based on 3-D burning regression method by parameterized feature CAD model (PFCADM) and lumped parameter, in consideration of time-dependent, erosive-burning-effect from internal ballistic numerical algorithm. By driving multi-parameter CAD model based on PFCADM, the approach is capable of conducting the geometric regression simulation of various grain combinations of complex configurations with different burning rates. Through suitably simplifying the internal ballistic numerical algorithm, the problems of coupling geometric regression simulation of sub-grains of different burning rates and high computational consumption of internal ballistic calculation were solved. One tri-burning-rate grain motor, which had been firing-tested, was used as the validation case of simulation. The results show that, with the 3-D grain regression model and sufficient accurate internal ballistic algorithm, the method realizes IBS of the case in low computational-consumption prediction of its performance within the accuracy of 2% during 1h clock-time. The application of the method provides a practical approach to aid SRM design of multi-burning-rate grain.
-
Key words:
- solid rocket motor /
- internal ballistic simulation /
- multi-burning-rate /
- grain design /
- unsteady flow
-
[1] Brooks W T.Solid propellant grain design and internal ballistics[R].NASA N73-15804,1972. [2] Willcox M A,Brewster M Q,Tang K C,et al.Solid rocket motor internal ballistics simulation using three-dimensional grain burnback[J].Journal of Propulsion and Power,2007,23(3):575-584. [3] BAO Futing,ZHAO Fei,LI Jinxian.One-dimensional interior ballistic calculation of solid rocket motors with dual burning rate propellant[J].Journal of Solid Rocket Technology,2002,25(1):5-7.(in Chinese) [4] Frederic D,Dominique R.A software for SRM grain design and internal ballistics evaluation,PIBAL[R].AIAA-2002-4299,2002. [5] LI Hongshun,SUN Bing.Zero-dimensional two-phase internal ballistic equations of dual-burning rate solid rocket motor and engineering computing method[J].Journal of Projectiles,Rockets,Missiles and Guidance,2009,29(4):150-153.(in Chinese) [6] Hartfield R,Jenkins R,Burkhalter J,et al.Analytical methods for predicting grain regression in tactical solid-rocket motors[J].Journal of Spacecraft and Rockets,2004,41(4):689-692. [7] Hartfield R,Jenkins R,Burkhalter J,et al.A review of analytical methods for solid rocket motor grain analysis[R].AIAA-2003-4506,2003. [8] Ricciardi A.Generalized geometric analysis of right circular cylindrical star perforated and tapered grains[J].Journal of Propulsion and Power,1992,8(1):51-58. [9] Willcox M A,Brewster M Q,Tang K C,et al.Solid propellant grain design and burnback simulation using a minimum distance function[J].Journal of Propulsion and Power,2007,23(2):465-475. [10] Breton P L,Ribereau D,Godfroy F,et al.SRM performance analysis by coupling bidimensional surface burnback and pressure field computations[R].AIAA 98-3968,1998. [11] Yildirim C,Aksel M H.Numerical simulation of the grain burnback in solid propellant rocket motor[R].AIAA-2005-4160,2005. [12] Sethian J A.Level set methods and fast marching methods[M].Cambridge,England:Cambridge University Press,1999. [13] Cavallini E,Favini B,Di Giacinto M,et al.SRM internal ballistic numerical simulation by SPINBALL model[R].AIAA-2009-5512,2009. [14] Cavallini E,Favini B,Di Giacinto M,et al.Internal ballistics simulation of a NAWC tactical SRM[J].Journal of Applied Mechanics,2011,78(5):051018.1-051018.8. [15] Kamran A,LIANG Guozhu.Design andoptimization of 3D radial slot grain configuration[J].Chinese Journal of Aeronautics,2010,23(4):409-414. [16] Kamran A,LIANG Guozhu,Rafique A F,et al.+/-3-sigma based design optimization of 3D finocyl grain[J].Aerospace Science and Technology,2013,26(1):29-37. [17] Nisar K,Liang G,Zeeshan Q.A hybrid optimization approach for SRM finocyl grain design[J].Chinese Journal of Aeronautics,2008,21(6):481-487. [18] LIN Xiaoshu,WANG Baoshan,JIN Shixue.Internal ballistic calculation method of dual-burning-rate solid rocket motor[J].Journal of Solid Rocket Technology,1991(4):12-18.(in Chinese) [19] Gany A,Aharon I.Internal ballistics considerations of nozzleless rocket motors[J].Journal of Propulsion and Power,1999,15(6):866-873. [20] Koroteev A S.Gas dynamic and thermophysical process in solid rocket propulsion[M].Moscow:Mashinostroenie Publishing House,2004. [21] LI Yiming.The principles of solid propellant rocket motor[M].Beijing:National Defence Industry Press,1985.(in Chinese) [22] Burden R L,Faires J D.Numerical analysis[M].9th ed.Boston,MA:Brooks/Cole Publishing Company,2011:872.
点击查看大图
计量
- 文章访问数: 1330
- HTML浏览量: 1
- PDF量: 441
- 被引次数: 0