航空发动机风扇叶片硬物冲击损伤特征

马超; 王玉娜; 武耀罡; 徐建新

doi:10.13224/j.cnki.jasp.2017.05.011

航空发动机风扇叶片硬物冲击损伤特征

doi: 10.13224/j.cnki.jasp.2017.05.011

1.
中国民航大学航空工程学院, 天津 300300
2.
中国民航大学飞行技术学院, 天津 300300

基金项目: 中央高校基本科研项目（3122016C002）

计量
- 文章访问数: 1203
- HTML浏览量: 8
- PDF量: 18
- 被引次数: 0
出版历程
- 收稿日期: 2016-08-15
- 刊出日期: 2017-05-28

Hard object impact damage characteristics of aero engine fan blade

摘要

摘要: 通过对国内近20年民用航空发动机风扇叶片外物损伤数据调研与统计分析，筛选最具典型特征的硬物冲击损伤数据，依据发动机维修手册对风扇叶片损伤类型特征进行了分类，研究损伤类型与发动机类型的相关性和差异性、损伤发生位置特征、损伤尺寸特征等内容.分析结果表明：发动机风扇叶片硬物冲击损伤类型表现出多样化特征，其中缺口和凹坑两类损伤类型发生概率较大，而且不同损伤类型在特定发动机型号中又存在一定的差异性.通过对损伤位置与尺寸特征的分析，表明风扇叶片的损伤位置存在一定的集簇统计规律，缺口的损伤尺寸特性存在一定的统计分布规律.研究结果能够为航空发动机风扇叶片实际的维护维修工作提供相关技术参考.
- 航空发动机 /
- 风扇叶片 /
- 硬物冲击损伤 /
- 损伤特征 /
- 数据分析
Abstract: Based on the foreign objects damage data of civil aviation engine fan blades in recent 20 years, the most typical features of hard object impact damage were filtered, and the fan blade damage characteristics were classified according to the engine maintenance manual. Then the relevance and differences between the damage types and engine types, the damage position features, and damage size features were analyzed. The results indicate that the damage type of engine fan blades hard object impact has diversified characteristics, in which the occurrence probability of two damage types (notch and dent) is larger, and there are some differences in specific engine type of different damage types. The analysis of the damage position and size features shows that there is a certain cluster statistical law of the fan blades damage position, and the damage size characteristic presents a certain statistical distribution. The results are able to provide technical reference for the actual maintenance of aero engine fan blades.
- aero engine /
- fan blade /
- hard object impact damage /
- damage characteristics /
- data analysis

HTML

参考文献(19)

[1]	关玉璞,陈伟,高德平.航空发动机叶片外物损伤研究现状［J］.航空学报,2007,28(4):851-857.GUAN Yupu,CHEN Wei,GAO Deping.Present status of investigation of foreign object damage to blade in aeroengine［J］.Acta Aeronautical et Astronautica Sinica,2007,28(4):851-857.(in Chinese)
[2]	季玉辉.基于Johnson-Cook模型的硬物损伤数值模拟研究［D］.南京：南京航空航天大学，2009.JI Yuhui.Numerical simulation of hard-body foreign object damage based on Johnson-Cook model［D］.Nanjing:Nanjing University of Aeronautics and Astronautics,2009.(in Chinese)
[3]	胡绪腾.外物损伤及其对钛合金叶片高循环疲劳强度的影响［D］.南京:南京航空航天大学,2009.HU Xuteng.Foreign object damage and its effect on high cycle fatigue strength of titanium alloy engine blades ［D］.Nanjing:Nanjing University of Aeronautics and Astronautics,2009.(in Chinese)
[4]	Kaufman A,Meyer A J,Jr.Investigation of the effect of impact damage on fatigue strength of jet-engine compressor rotor blades［R］.NACA TN-3275,1956.
[5]	Dunham J M A,Mech G I E,Grad R A S.Damage to axial compressors［J］.Journal of the Royal Aeronautical Society,1959,63:576-580.
[6]	Storace A F.Foreign object impact design criteria［R］.AFAPL-TR-78-81,1982.
[7]	Nicholas T,Barber J P,Bertke R S.Impact damage on titaniun leading edges from small hard objects［J］.Experimental Mechanics,1980,20(3):357-364.
[8]	Bartsch T M.High cycle fatigue (HCF) science and technology program 1999 annual report［R］.AFRL-PR-WP-TR-2000-2004,2000.
[9]	United States Air Force.MIL-HDBK-1783B Change 2:engine structural integrity program (ENSIP) ［S］.Washington:United States Air Force,2004.
[10]	Weeks C,Bastnagel P,Cook T,et al.FOD analytical modelling-FOD event modelling［R］.AFRL-ML-WP-TR-2001-4159,2001.
[11]	Tranter P H,Gould P J,Harrison G F.Laboratory simulation and finite element modelling of aerofoil impact damage ［C］//Proceedings of the 8th National Turbine Fatigue High Cycle Fatigue Conference.Monterey,CA:ASME,2003:14-16.
[12]	Nowell D,Duo P,Stewart I F.Prediction of fatigue performance in gas turbine blades after foreign object damage［J］.International Journal Fatigue,2003,25(9):963-969.
[13]	Oakley S Y.On the high- and low- cycle fatigue of aero-engine compressor blades following foreign object damage ［D］.London:University of Oxford,2004.
[14]	孙振德,鲁启新.外物撞击损伤叶片的模拟试验方法.［J］.航空动力学报,1989,4(1):30-32,92.SUN Zhende,LU Qixin.Investigation on simulation of foreign object impact damage to compressor blade［J］.Journal of Aerospace Power,1989,4(1):30-32,92.(in Chinese)
[15]	蒋向华,王延荣.采用流固耦合方法的整级叶片鸟撞击数值模拟［J］.航空动力学报,2008,23(2):299-304.JIANG Xianghua,WANG Yanrong.Numerical simulation of bird impact on bladed rotor stage by fluid-solid coupling method ［J］.Journal of Aerospace Power,2008,23(2):299-304.(in Chinese)
[16]	潘辉,赵振华,陈伟.航空发动机叶片外物损伤试验模拟方法［J］.航空发动机,2012,38(1):51-54.PAN Hui,ZHAO Zhenhua,CHEN Wei.Aeroengine blade foreign object damage test simulation method［J］.Aeroengine,2012,38(1):51-54.(in Chinese)
[17]	柴象海,侯亮,王志强,等.航空发动机宽弦风扇叶片鸟撞损伤模型标定［J］.航空动力学报,2016,31(5):1032-1038.CHAI Xianghai,HOU Liang,WANG Zhiqiang,et al.Bird strike model calibration for an aero engine wide-chord fan blade［J］.Journal of Aerospace Power,2016,31(5):1032-1038.(in Chinese)
[18]	康继东.钛制压气机叶片外物损伤的维修性研究［D］.南京:南京航空航天大学,1996.KANG Jidong.Maintainability studies titanium compressor blades FOD［D］.Nanjing:Nanjing University of Aeronautics and Astronautics,1996.(in Chinese)
[19]	马超,武耀罡,师利中,等.航空发动机风扇叶片硬物冲击损伤统计分析［J］.航空维修与工程,2016(3):41-42.MA Chao,WU Yaogang,SHI Lizhong,et al.Hard object impact damage statistical analysis of aero-engine fan blade［J］.Aviation Maintenance and Engineering,2016(3):41-42.(in Chinese)