Experiment on microscale flames stabilized on surface of annular porous media

LIN Peihua; LIN Yuzhen; XUE Xin; ZHANG Liang; ZHANG Chi

doi:10.13224/j.cnki.jasp.2017.12.019

Experiment on microscale flames stabilized on surface of annular porous media

doi: 10.13224/j.cnki.jasp.2017.12.019

1.
National Key Laboratory of Science and Technology on Aero-Engine Aerothermodynamics,School of Energy and Power Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100191,China
2.
National Key Laboratory of Science and Technology on AeroEngine Aerothermodynamics,School of Energy and Power Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100191,China

计量
- 文章访问数: 650
- HTML浏览量: 83
- PDF量: 443
- 被引次数: 0
出版历程
- 收稿日期: 2016-04-06
- 刊出日期: 2017-12-28

Experiment on microscale flames stabilized on surface of annular porous media

1.
National Key Laboratory of Science and Technology on Aero-Engine Aerothermodynamics,School of Energy and Power Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100191,China
2.
National Key Laboratory of Science and Technology on AeroEngine Aerothermodynamics,School of Energy and Power Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100191,China

摘要

摘要: The characteristics of the surfacestabilized flame on a porous medium in an annular microscale channel were studied experimentally with methane/air mixture. In the pressure drop characteristic study, three porous media with the same pore diameter and different porosities were used and compared. The substitution of the air for the mixture was verified accurately at first. Then the relationship expression of the air pressure drop characteristic was acquired for each porous medium according to the Forcheimer correlation. The third porous medium was selected for the following research, as it had the expression closer to the Darcys law. As for the ignition characteristic study of the surfacestabilized flame, a reasonable criterion was established for the flammability limit determination. Based on the criterion, the result showed that the limit reached the minimum value when the mixture equivalence ratio was 0.9. During the extinction characteristic study, through the welldesigned operating procedure, the experiment was conducted to obtain the strict extinction limit of the surfacestabilized flame. It was indicated that the extinction limit at mixture equivalence ratio of 08 was the least.
- pressure drop /
- flammability limit /
- extinction limit /
- microscale combustion /
- porous media /
- surfacestabilized flame /
- premixed combustion
Abstract: The characteristics of the surfacestabilized flame on a porous medium in an annular microscale channel were studied experimentally with methane/air mixture. In the pressure drop characteristic study, three porous media with the same pore diameter and different porosities were used and compared. The substitution of the air for the mixture was verified accurately at first. Then the relationship expression of the air pressure drop characteristic was acquired for each porous medium according to the Forcheimer correlation. The third porous medium was selected for the following research, as it had the expression closer to the Darcys law. As for the ignition characteristic study of the surfacestabilized flame, a reasonable criterion was established for the flammability limit determination. Based on the criterion, the result showed that the limit reached the minimum value when the mixture equivalence ratio was 0.9. During the extinction characteristic study, through the welldesigned operating procedure, the experiment was conducted to obtain the strict extinction limit of the surfacestabilized flame. It was indicated that the extinction limit at mixture equivalence ratio of 08 was the least.
- pressure drop /
- flammability limit /
- extinction limit /
- microscale combustion /
- porous media /
- surfacestabilized flame /
- premixed combustion

HTML

参考文献(23)

[1]	CHOU S K,YANG W M,CHUA K J,et al.Development of micro power generators:a review［J］.Applied Energy,2011,88(1):1-16.
[2]	FERNANDEZPELLO A C.Micropower generation using combustion:issues and approaches［J］.Proceedings of the Combustion Institute,2002,29(1):883-899.
[3]	JU Y,MARUTA K.Microscale combustion:technology development and fundamental research［J］.Progress in Energy and Combustion Science,2011,37(6):669-715.
[4]	SHIRSAT V,GUPTA A K.A review of progress in heat recirculating mesoscale combustors［J］.Applied Energy,2011,88(12):4294-4309.
[5]	KAISARE N S,VLACHOS D G.A review on microcombustion:fundamentals,devices and applications［J］.Progress in Energy and Combustion Science,2012,38(3):321-359.
[6]	ZHONG Beijing,WANG Jianhua.Experimental study on premixed CH4/air mixture combustion in micro Swissroll combustors［J］.Combustion and Flame,2010,157(12):2222-2229.
[7]	MARUTA K,TAKEDA K,AHN J,et al.Extinction limits of catalytic combustion in micro channels［J］.Proceedings of the Combustion Institute,2002,29(1):957-963.
[8]	BADRA J A,MASRI A R.Catalytic combustion of selected hydrocarbon fuels on platinum:reactivity and heterohomogeneous interactions［J］.Combustion and Flame,2012,159(2):817-834.
[9]	MUJEEBU M A,ABDULLAH M Z,ABU BAKAR M Z,et al.Applications of porous media combustion technology:a review［J］.Applied Energy,2009,86(9):1365-1375.
[10]	JIANG Liqiao,ZHAO Daiqing,WANG Xiaohan,et al.Experimental study of a novel miniatureburner prototype with a low heat loss［J］.Journal of Engineering for Thermal Energy and Power,2008,23(1):88-91.(in Chinese)
[11]	MCINTOSH A C.A model of large heat transfer surface combustion with radiant heat emission［J］.Combustion and Flame,1991,83(2):111-126.
[12]	DIAMANTIS D J,MASTORAKOS E,GOUSSIS D.Simulations of premixed combustion in porous media［J］.Combustion Theory Model,2002,6(3):383-411.
[13]	MARBACH T L,SADASIVUN V,AGRAWAL A K.Investigation of a miniature combustor using porous media surface stabilized flame［J］.Combustion Science and Technology,2007,179(9):1901-1922.
[14]	LI J,CHOU S K,LI Z W,et al.Experimental investigation of porous media combustion in a planar microcombustor［J］.Fuel,2010,89(3):708-715.
[15]	WANG Hongmin,WEI Chunzhi,ZHAO Pinghui,et al.Experimental study on temperature variation in a porous inert media burner for premixed methane air combustion［J］.Energy,2014,72:195-200.
[16]	JIANG Liqiao,ZHAO Daiqing,YAMASHITA H.Study on a lower heat loss micro gas turbine combustor with porous inlet［J］.Combustion Science and Technology,2015,187(9):13760-1391.
[17]	ZHANG Long,XU Quanhong,ZHANG Chi,et al.Experiment of blowout performance of premixed flame on porous media surface［J］.Journal of Aerospace Power,2014,29(4):801-806.(in Chinese)
[18]	ZHANG Long,XU Quanhong,ZHANG Chi,et al.The effect of porous media structure parameters on the surface flame blowout performance［J］.Journal of Aerospace Power,2014,29(7):1654-1659.(in Chinese)
[19]	ZHANG Long,XU Quanhong,ZHANG Chi,et al.Effect of restricted domain and premixed gas initial temperature on the flame blowout performance of surface flame on porous media surface［J］.Journal of Aerospace Power,2014,29(6):1358-1362.(in Chinese)
[20]	XI Zhengping,TANG Huiping.Sintered metal powder porous media［M］.Beijing:Metallurgical Industry Press,2009.(in Chinese)
[21]	LIN Jianzhong.Fluid mechanics［M］.2nd ed.Beijing:Tsinghua University Press,2013.(in Chinese)
[22]	YANG Shiming,TAO Wenquan.Heat transfer［M］.4th ed.Beijing:Higher Education Press,2006.(in Chinese)
[23]	LIN Peihua,LIN Yuzhen,XUE Xin,et al.Experimental investigation on the limit of surfacestabilized flame on a porous media in a mesoscale channel［J］.Journal of Propulsion Technology,2016,37(2):311-316.(in Chinese)