[1] |
CHINN J J.An appraisal of swirl atomezer invisid flow analysis:Part Ⅰ the princlple of maximun flow for a swirl atomizer and its use in the exposition and comparison of early flow analyses[J].Atomization and Sprays,2009,19(3):263-282.
|
[2] |
HORVAY M,LEUCKEL W.Theoretical investigation of swirl nozzles for pressure-jet atomization[J].German Chemical Engineering,1986,9(5):276-283.
|
[3] |
朱宁昌,刘国球.液体火箭发动机设计[M].北京:宇航出版社,1994.
|
[4] |
KIM S,KHIL T,KIM D,et al.Effect of geometric parameters on the liquid film thickness and air core formation in a swirl injector[J].Measurement Science and Technology,2008,20(1):015403.1-015403.11.
|
[5] |
KHIL T,CHUNG Y,BAZAROV V G,et al.Dynamic characteristics of simplex swirl injector in low frequency range[J].Journal of Propulsion and Power,2012,28(2):323-333.
|
[6] |
刘娟,李清廉,王振国,等.基于VOF方法模拟离心式喷嘴内部流动过程[J].航空动力学报,2011,26(9):1987-1995.LIU Juan,LI Qinglian,WANG Zhenguo,et al.Numerical simulation of flow field in pressure-swirl injector based on VOF interface tracking method[J].Journal of Aerospace Power,2011,26(9):1987-1995.(in Chinese)
|
[7] |
王国辉,蔡体敏,何国强,等.一种旋流式喷嘴的实验和数值研究[J].推进技术,2003,24(1):28-32.WANG Guohui,CAI Timin,HE Guoqiang,et al.Experimental and numerical investigation of a swirl atomizer[J].Journal of Propulsion and Technology,2003,24(1):28-32.(in Chinese)
|
[8] |
王成军,陈海耿,马金凤.基于VOF方法数值模拟离心式喷嘴内两相流流动[J].东北大学学报(自然科学版),2009,30(7):1005-1008. WANG Chengjun,CHEN Haigeng,MA Jinfeng.VOF-base numerical simulation of two-phase flow in swril atomizer[J].Journal of Northeastern University (Natural Science),2009,30(7):1005-1008.(in Chinese)
|
[9] |
岳明,徐行,杨茂林.离心式喷嘴内气液两相流动的数值模拟[J].工程热物理学报,2003,24(5):888-890.YUE Ming,XU Hang,YANG Maolin.Numerical study of two-phase flow in atomizer[J].Journal of Engineering Thermophysics,2003,24(5):888-890.(in Chinese)
|
[10] |
宋大亮,周立新,陈建华,等.离心式喷嘴全流场数值模拟[J].火箭推进,2011,37(5):36-40. SONG Daliang,ZHOU Lixin,CHEN Jianhua,et al.Numerical simulation of full flowfield of centrifugal nozzle[J].Journal of Rocket Propulsion,2011,37(5):36-40.(in Chinese)
|
[11] |
王成军,陈海耿,张宝诚.双路离心式喷嘴的实验与数值模拟[J].工程热物理学报,2010,31(10):1797-1799. WANG Chengjun,CHEN Haigeng,ZHANG Baocheng.Experiment and numerical simulation of a dual-orifice pressure-swirl atomizer[J].Journal of Engineering Thermophysics,2010,31(10):1797-1799.(in Chinese)
|
[12] |
刘娟,孙明波,李清廉,等.基于VOF方法分析离心式喷嘴结构参数对性能影响[J].航空动力学报,2011,26(12):2826-2833.LIU Juan,SUN Mingbo,LI Qinglian,et al.Analysis of geometric parameters influence on pressure swirl injector performance based on VOF interface method[J].Journal of Aerospace Power,2011,26(12):2826-2833.(in Chinese)
|
[13] |
刘娟.旋转锥形液膜破碎过程实验与仿真研究[D].长沙:国防科学技术大学,2012. LIU Juan.Experimental and numerical simulation of the breakup process of swirling conical liquid sheet[D].Changsha:National University of Defense Technology,2012.(in Chinese)
|
[14] |
WANG Feng,FU Qingfei,YANG Lijun.Numerical simulation of flow in swirl injector for power-law fluid[J].Journal of Aerospace Power,2012,27(4):890-899.
|
[15] |
陈懋章.粘性流体动力学基础[M].北京:高等教育出版社,2002.
|
[16] |
于勇,张俊明,姜连田.FLUENT入门与进阶教程[M].北京:北京理工大学出版社,2008.
|
[17] |
李清廉.同轴式三组元喷嘴性能分析、工程应用和设计评定[D].长沙:国防科学技术大学,2003.LI Qingian.Performace analysis,engineering application,design and evaluating of coaxial tripropellant injector[D].Changsha:National University of Defense Technology,2003.(in Chinese)
|
[18] |
王福军.计算流体动力学分析-CFD软件原理与应用[M].北京:清华大学出版社,2004.
|
[19] |
张新桥.基于离心式喷嘴的多组分燃料喷雾燃烧过程研究[D].长沙:国防科学技术大学,2016. ZHANG Xinqiao.Research on spray combustion of multi-compoment fuel based on swirl injector[D].Changsha:National University of Defense Technology,2016.(in Chinese)
|