留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

熔盐泵盐析两相流冷态模型试验和数值研究

方向阳 邵春雷 杨勇

方向阳, 邵春雷, 杨勇. 熔盐泵盐析两相流冷态模型试验和数值研究[J]. 航空动力学报, 2018, 33(6): 1403-1412. doi: 10.13224/j.cnki.jasp.2018.06.014
引用本文: 方向阳, 邵春雷, 杨勇. 熔盐泵盐析两相流冷态模型试验和数值研究[J]. 航空动力学报, 2018, 33(6): 1403-1412. doi: 10.13224/j.cnki.jasp.2018.06.014
Cold model experiments and numerical study on crystallization two-phase flow in molten salt pump[J]. Journal of Aerospace Power, 2018, 33(6): 1403-1412. doi: 10.13224/j.cnki.jasp.2018.06.014
Citation: Cold model experiments and numerical study on crystallization two-phase flow in molten salt pump[J]. Journal of Aerospace Power, 2018, 33(6): 1403-1412. doi: 10.13224/j.cnki.jasp.2018.06.014

熔盐泵盐析两相流冷态模型试验和数值研究

doi: 10.13224/j.cnki.jasp.2018.06.014
基金项目: 国家自然科学基金(51306087);江苏省高等学校自然科学研究重大项目(17KJA480003);江苏省“六大人才高峰项目”(GDZB-032);江苏省绿色过程装备重点实验室开放课题基金(GPE201704)

Cold model experiments and numerical study on crystallization two-phase flow in molten salt pump

  • 摘要: 为了揭示熔盐泵内盐析两相流动的规律,采用白金汉定理,建立了熔盐泵输送固液两相流的相似准则,根据所设计的熔盐泵模型试验方案,对熔盐泵内部流动进行了数值模拟,采用高速摄像技术捕捉了泵内的盐析两相流动,阐述了试验结果与模拟结果之间的差别。研究了颗粒直径和密度对熔盐泵外特性和内部流动的影响。结果表明:数值模拟结果和试验结果之间的误差小于10%。叶轮流道出口处颗粒的绝对速度从叶片的压力面到吸力面逐渐减小。分析得到了叶轮内固相和液相的速度三角形之间的关系,当颗粒的密度大于液相的密度时,颗粒绝对速度沿圆周方向的分量小于液相。进一步分析得到了叶轮出口处密度分别为2000、2250、2500、2750、3000kg/m3的颗粒的运动速度三角形之间的关系,颗粒密度越大,叶轮出口绝对速度沿圆周方向的分量越小,泵的扬程越小。

     

  • [1] 韩利峰,陈永忠,周大勇,等.HTS熔盐实验回路分布式控制系统设计[J].核技术,2013,36(9):1-6.HAN Lifeng,CHEN Yongzhong,ZHOU Dayong,et al.Design of the distributed control system for HTS molten salt test loop[J].Nuclear Techniques,2013,36(9):1-6.(in Chinese)
    [2] 杨敏官,吴承福,高波,等.离心泵叶轮内盐析晶体颗粒分布特性试验[J].江苏大学学报(自然科学版),2011,32(5):528-532.YANG Minguan,WU Cheugfu,GAO Bo,et al.Distribution feature experiment of salt-out crystal particles in a centrifugal pump impeller[J].Journal of Jiangsu University (Natural Science Edition),2011,32(5):528-532.(in Chinese)
    [3] 高波,杨敏官.旋流泵内颗粒分布及对盐析特性的影响[J].工程热物理学报,2009,30(12):2031-2033.GAO Bo,YANG Minguan.Particle concentration distribution and its effect on salt-out features in a vortex pump[J].Journal of Engineering Thermophysics,2009,30(12):2031-2033.(in Chinese)
    [4] 邵春雷,顾伯勤,周剑锋,等.熔盐泵外特性及内部流动的试验及数值模拟[J].航空动力学报,2016,31(8):1935-1942.SHAO Chunlei,GU Boqin,ZHOU Jianfeng,et al.Experiment and numerical simulation of external performances and internal flow of a molten salt pump[J].Journal of Aerospace Power,2016,31(8):1935-1942.(in Chinese)
    [5] 邵春雷,顾伯勤,黄星路,等.低比转速泵叶轮流道内部流动的PIV试验[J].航空动力学报,2010,25(9):2091-2096.SHAO Chunlei,GU Boqin,HUANG Xinglu,et al.Experimental study on flow in the impeller of low specific speed pump using particle image velocimetry[J].Journal of Aerospace Power,2010,25(9):2091-2096.(in Chinese)
    [6] LIU Dong,WANG Yayun,WANG Yingze,et al.Research of liquid-solid two phase flow in centrifugal pump with crystallization phenomenon[J].International Journal of Fluid Machinery and Systems,2014,7(2):54-59.
    [7] 刘栋,杨敏官,高波.离心泵叶轮内部伴有盐析流场的PIV试验[J].农业机械学报,2008,39(11):55-58.LIU Dong,YANG Minguan,GAO Bo.PIV measurement of flow with salt-out in centrifugal pump[J].Transactions of the Chinese Society for Agricultural Machinery,2008,39(11):55-58.(in Chinese)
    [8] 杨敦敏.离心泵内两相流流动特性的图像测量[D].西安:西安理工大学,2004.YANG Dunmin.Image measurement of two-phase flow characteristic in centrifugal pump impeller[D].Xian:Xian University of Technology,2004.(in Chinese)
    [9] ZHU Bing,CHEN Hongxun,WEI Qun.Numerical and experimental investigation of cavitating characteristics in centrifugal pump with gap impeller[J].International Journal of Turbo and Jet-Engines,2014,31(2):187-196.
    [10] 马冬英,雷宗琪,梁国柱.基于相对流面理论的液体火箭发动机泵内部流动计算[J].航空动力学报,2013,28(3):583-590.MA Dongying,LEI Zongqi,LIANG Guozhu.Calculation of internal flow in pump of liquid rocket engine based on theory of relative stream surface[J].Journal of Aerospace Power,2013,28(3):583-590.(in Chinese)
    [11] 张群峰,闫盼盼,单建平,等.航空发动机滑片泵数值模拟[J].航空动力学报,2014,29(11):2537-2542.ZHANG Qunfeng,YAN Panpan,SHAN Jianping,et al.Numerical simulation on an aero-engine vane pump[J].Journal of Aerospace Power,2014,29(11):2537-2542.(in Chinese)
    [12] 杨敏官,邵腾,高波,等.熔盐泵分流式空间导叶内部流动及其非定常特性[J].排灌机械工程学报,2015,33(4):306-310.YANG Minguan,SHAO Teng,GAO Bo,et al.Interior flow and unsteady performance of molten salt pump with splitter space guide vane[J].Journal of Drainage and Irrigation Machinery Engineering,2015,33(4):306-310.(in Chinese)
    [13] 李云校,康灿,朱宜超,等.蜗壳结构对立式高温熔盐泵性能的影响[J].化工学报,2013,64(8):2853-2859.LI Yunxiao,KANG Can,ZHU Yichao,et al.Influence of volute structure on performance of vertically-installed high temperature molten salt pump[J].Journal of Chemical Industry and Engineering,2013,64(8):2583-2859.(in Chinese)
    [14] SHAO Chunlei,ZHOU Jianfeng,CHENG Wenjie.Experimental and numerical study of external performance and internal flow of a molten salt pump that transports fluids with different viscosities[J].International Journal of Heat and Mass Transfer,2015,89:627-640.
    [15] 邵春雷,顾伯勤,周剑锋,等.离心泵内部流动高速摄像测量及误差分析[J].农业工程学报,2015,31(24):52-58.SHAO Chunlei,GU Boqin,ZHOU Jianfeng,et al.Internal flow measurement in centrifugal pump by high speed photography and error analysis[J].Transactions of the Chinese Society of Agricultural Engineering,2015,31(24):52-58.(in Chinese)
    [16] LISSETT B,MAURICIO G P.Experimental visualization of two-phase flow inside an electrical submersible pump stage[J].Journal of Energy Resources Technology,2011,133(4):042901.1-042901.12.
    [17] ZHANG Yuliang,LI Yi,CUI Baoling,et al.Numerical simulation and analysis of solid-liquid two-phase flow in centrifugal pump[J].Chinese Journal of Mechanical Engineering,2013,26(1):53-60.
    [18] 刘栋.离心泵内部盐析流场的数值模拟及实验研究[D].江苏 镇江:江苏大学,2008.LIU Dong.Numerical simulation and PIV measurement of salt-out two-phase flow in centrifugal pump[D].Zhen Jiang Jiangsu:Jiangsu University,2008.(in Chinese)
  • 加载中
计量
  • 文章访问数:  725
  • HTML浏览量:  60
  • PDF量:  560
  • 被引次数: 0
出版历程
  • 收稿日期:  2016-12-04
  • 刊出日期:  2018-06-28

目录

    /

    返回文章
    返回