三自由度GMA油膜轴承可视化实验装置

尹雪梅; 姬帅城; 吴超; 马明飞; 张绍林

doi:10.13224/j.cnki.jasp.20200380

三自由度GMA油膜轴承可视化实验装置

doi: 10.13224/j.cnki.jasp.20200380

1. 郑州轻工业大学能源与动力工程学院, 郑州 450002;
2. 郑州轻工业大学机电工程学院, 郑州 450002;
3. 郑州大学机械与动力工程学院, 郑州 450001

基金项目:

国家自然科学基金（U1404515，51706209）；河南省科技攻关项目（202102210071）；河南省高等学校重点科研项目（20A460028）

详细信息

作者简介:
尹雪梅(1979-),女,副教授,博士,主要从事流体传热性能的研究工作。

通讯作者:
吴超(1978-),男,教授,博士,主要进行轴承-转子系统动力学的研究工作。E-mail:wuchao7379@163.com

中图分类号: V232.2;TH133.3
计量
- 文章访问数: 320
- HTML浏览量: 81
- PDF量: 181
- 被引次数: 0
出版历程
- 收稿日期: 2020-09-10
- 刊出日期: 2021-08-28

Three degree of freedom visualization experimental device of GMA oil film bearing

1. School of Energy and Power Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, China;
2. School of Mechanical and Electrical Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, China;
3. School of Mechanical and Power Engineering, Zhengzhou University, Zhengzhou 450001, China

摘要

摘要: 给出了一种三自由度超磁致伸缩驱动器（GMA）油膜轴承可视化实验装置，介绍了它的组成、工作原理及调整方法。该实验装置利用涡轮蜗杆-丝杠传动机构调整实验主轴竖直高度，采用十字滑台、GMA、模具弹簧调整实验轴承在水平面的位置，方便改变实验轴承偏心率，并可利用GMA控制轴承座，减少转子系统振动。在实验台上，进行了椭圆轴承油膜的温度和压力测量以及轴心静平衡位置调整实验。结果表明：通过控制椭圆轴承短轴油膜来调整所支撑转子系统轴心静平衡位置的效果更明显。该实验台可以采集旋转速度在0~10 000 r/min之间的转子轴心轨迹、控制转子工频振动、观察油膜和气穴的形成与破裂实验，为GMA油膜轴承动态性能实验研究打下了一定基础。
- 油膜轴承实验装置 /
- 超磁致伸缩驱动器（GMA） /
- 三自由度 /
- 静平衡位置 /
- 振动控制
Abstract: A three-degree-of-freedom visual experimental device for a controlled oil-film bearing with giant magnetostrictive actuators(GMA) was presented. The basic structure,working principle and adjustment method of the experimental device were introduced. A turbo-wormscrew drive mechanism was used to adjust the vertical height of the experimental spindle. And a cross sliding table,GMA and a mold spring were adopted to adjust the position of the experimental bearing on the horizontal plane. It was convenient to change the eccentricity of the experimental bearing and to control the bearing seat by using a GMA to reduce the vibration of the rotor. The pressure and temperature of the oil film of the elliptic bearing were measured on the adjusted experimental bench. Adjustment experiments of static balance position of the rotor supported by the elliptic bearing were also carried out. Results showed that it was obvious to change the static balance position of the rotor system by controlling the short axis oil film of the elliptical bearing. The experimental device can be used to conduct experiments such as axis trajectory acquisition, rotor power frequency vibration control,formation and fracture observation of oil film and cavitation with rotating speed between 0~10 000 r/min,laying a certain foundation for the subsequent experiments on the dynamic performance of GMA oil film bearing.
- oil film bearing experimental device /
- gaint magnetostrictive actuators(GMA) /
- three degrees of freedom /
- static balance position /
- vibration control

HTML

参考文献(18)

[1]	张直明.滑动轴承流体动力涧滑理论[M].北京:高等教育出版社,1986.
[2]	李锋,刘占生,李明海,等. 非零压差边界下间隙流动雷诺方程近似解析解[J].航空动力学报,2018,33(1):156-164. LI Feng,LIU Zhansheng,LI Minghai,et al.Approximate analytical solution of the Reynolds equation for clearance flow with pressure difference boundary conditions[J]. Journal of Aerospace Power,2018,33(1):156-164.(in Chinese)
[3]	ZHANG Shenglun, XU Hua, ZHANG Lei, et al. Vibration suppression mechanism research of adjustable elliptical journal bearing under synchronous unbalance load[J]. Tribology International,2018,132:185-198.
[4]	AMIT S, AMIT C. Experimental study for performance evaluation of steadily loaded true elliptical and orthogonally displaced non-circular journal bearing profiles[J]. Industrial Lubrication and Tribology,2016,68(6):702-711.
[5]	WANG W,CAI SZ,WU C,et al.Vibration suppression evaluation of smart journal bearing using giant magnetostrictive actuators[J].Key Engineering Materials,2015,3920:323-327.
[6]	李国顺,文振华,傅勤毅,等. 主动控制空气支承动态特性的研究与优化[J].机械工程学报,2002,38(5):27-29. LI Guoshun, WEN Zhenhua, FU Qinyi, et al. Analysis and optimization of the dynamic characteristics in a active controlled air bearing system[J]. Chinese Journal of Mechanical Engineering,2002,38(5):27-29.(in Chinese)
[7]	吴超,尹雪梅,王文.GMA油膜轴承动态控制轴心轨迹的试验研究[J].中国机械工程,2016,27(1):41-45. WU Chao,YIN Xuemei,WANG Wen.Dynamic experimental investigation on vibration compression function of rotor center trajectory using controllable oil-film bearing with GMA[J]. China Mechanical Engineering, 2016, 27(1):41-45.(in Chinese)
[8]	KNIGHT J D, GHADIMI P. Analysis and observation of cavities in a journal bearing considering flow continuity[J]. Tribology Transactions,2001,44(1):88-96.
[9]	陈滢,孙美丽,房超峰,等. 动载滑动轴承油膜分布及压力同步采集研究[J].润滑与密封,2006,31(10):157-160. CHEN Ying,SUN Meili,FANG Chaofeng,et al.Simultaneous pressure measurement and high speed photography study of cavitation in a dynamically loaded journal bearing[J]. Lubrication Engineering, 2006, 31(10):157-160.(in Chinese)
[10]	SUN D C, BREWE D E. Simultaneous pressure measurement and high-speed photograph study of cavitation in a dynamically loaded journal bearing[J]. Journal of Tribology, 1993,115(1):88-95.
[11]	房超峰,孙美丽,王贤刚,等. 动载滑动轴承瞬态油膜的全景实验研究[J].润滑与密封,2007,32(7):54-58. FANG Chaofeng, SUN Meili, WANG Xiangang, et al. Experimental investigation of dynamically loaded journal bearing with panoramic view of transient oil film[J]. Lubrication Engineering,2007,32(7):54-58.(in Chinese)
[12]	SUN Dacheng,WANG Wen,ZHANG Zhiming,et al.A theory of cavitation in an oscillatory oil squeeze film[J].Tribology Transactions,2008,51(3):332-340.
[13]	SUN Meili, ZHANG Zhiming, CHEN Xiaoyang, et al. Experimental study of cavitation in an oscillatory oil squeeze film[J].Tribology Transactions,2008,51(3):341-350.
[14]	王丽丽,路长厚,张建川,等. 高速螺旋油楔滑动轴承空穴机理的实验研究[J].振动与冲击,2012,31(5):1-5, 20. WANG Lili,LU Changhou,ZHANG Jianchuan,et al.Experimental investigation on cavitation mechanism of a high speed spiral oil wedge journal bearing[J].Journal of Vibration and Shock,2012,31(5):1-5, 20.(in Chinese)
[15]	杨莹. 螺旋油楔滑动轴承空穴特性的理论与实验研究[D]. 济南:山东大学,2010. YANG Ying.Theoretical and experimental study on the cavitation characteristics of a spiral oil wedge journal bearing[D]. Jinan:Shandong University,2010.(in Chinese)
[16]	吴超,尹雪梅,马明飞,等. 基于超磁致伸缩驱动器的油膜轴承-转子系统的稳定性研究[J]. 振动与冲击,2020,39(1):57-61. WU Chao, YIN Xuemei, MA Mingfei, et al. Stability of oil film bearing-rotor system based on GMA[J]. Journal of Vibration and Shock,2020,39(1):57-61.(in Chinese)
[17]	梁存真,夏伯乾,郭红,等. 基于有机玻璃切削透光度的工艺参数试验研究[J].机械设计与制造,2014(9):19-21, 25. LIANG Cunzhen, XIA Boqian, GUO Hong, et al. Experimental investigation of process parameters based on plexiglass cutting transmittance[J]. Machinery Design and Manufacture,2014(9):19-21, 25.(in Chinese)
[18]	赵保伟,巩晓赟,丁丽丽,等. 基于LabVIEW的齿轮调制故障检测系统设计[J].机床与液压,2018,46(5):143-148. ZHAO Baowei,GONG Xiaoyun,DING Lili,et al.Design of gear modulation fault detection system based on LabVIEW[J].Machine Tool and Hydraulics,2018,46(5):143-148.(in Chinese)