取向相关的单晶高温合金低周疲劳寿命评估方法

隋天校; 石多奇; 王相平; 杜伟; 杨晓光

doi:10.13224/j.cnki.jasp.20200521

取向相关的单晶高温合金低周疲劳寿命评估方法

doi: 10.13224/j.cnki.jasp.20200521

1.
北京航空航天大学能源与动力工程学院，北京 100191
2.
中国航空发动机集团有限公司沈阳发动机研究所，沈阳 110015
3.
中国航天科工集团有限公司北京空天技术研究所，北京 100074

基金项目: 国家科技重大专项（2017-Ⅳ-0012-0049）

详细信息

作者简介:
隋天校（1993-），男，博士生，主要从事高温结构强度与疲劳断裂研究。

中图分类号: V232.4
计量
- 文章访问数: 490
- HTML浏览量: 140
- PDF量: 185
- 被引次数: 0
出版历程
- 收稿日期: 2020-12-04
- 刊出日期: 2021-10-28

Orientation-dependent low-cycle fatigue life evaluation method for single crystal superalloys

1.
School of Energy and Power Engineering，Beijing University of Aeronautics and Astronautics，Beijing 100191，China
2.
Shenyang Engine Research Institute，Aero Engine Corporation of China，Shenyang 110015，China
3.
Beijing Aerospace Technology Institute，China Aerospace Science and Industry Corporation Limited，Beijing 100074，China

摘要

摘要: 为研究单晶(SC)高温合金低周疲劳（LCF）性能各向异性规律，收集了SC7-14-6、DD3、PWA1480、Rene N4与DD6共5种单晶合金的低周疲劳试验数据，校验了文献中单晶合金不同晶体取向的弹性模量计算方法，利用不同取向的弹性模量对总应变幅进行修正，提出了一种简单的适用于单晶合金不同取向的低周疲劳损伤参量，进而形成了取向相关的单晶合金低周疲劳寿命评估方法，利用上述5种合金的试验数据对方法进行了验证。结果表明：弹性模量是单晶合金LCF性能各向异性的重要影响因素；文献中的不同晶体取向弹性模量换算方法较为可靠；所提低周疲劳寿命评估方法的预测结果大多在2倍分散带内。此方法形式简单、效果显著，较为适合工程应用。
- 取向相关 /
- 低周疲劳（LCF） /
- 单晶（SC）高温合金 /
- 弹性模量 /
- 寿命评估方法
Abstract: In order to investigate the anisotropy of low-cycle fatigue （LCF） properties of single crystal （SC） superalloys，the LCF experimental data of SC7-14-6，DD3，PWA1480，Rene N4 and DD6 were collected from literatures.The calculation method of elastic modulus of SC superalloys was verified.The elastic modulus of different orientations was introduced to modify the total strain amplitude.A simple expression of LCF damage parameter was proposed，which was suitable for different crystallographic orientations of single crystal superalloys.Furthermore，an orientation-dependent LCF life evaluation method was formed.The experimental data of the above five alloys were used to validate this method.The results showed that：the elastic modulus was an important factor influencing the anisotropy of SC superalloys' LCF performance；the elastic modulus conversion method among different orientations in literature was reliable；most prediction results of the proposed method were within a factor of two.The proposed method is quite simple and effective，and it is suitable for engineering applications.
- orientation-dependent /
- low-cycle fatigue（LCF） /
- single crystal （SC） superalloys /
- elastic modulus /
- life evaluation method

HTML

参考文献(26)

[1]	胡晓安,石多奇,庞学佳,等.某涡轮叶片热障涂层的寿命预测方法[J].航空动力学报,2018,33（1）:48-53.
[2]	蒋康河,陈竞炜,荆甫雷,等.镍基单晶高温合金DD6气膜孔热机械疲劳试验[J].航空动力学报,2019,34（5）:980-986.
[3]	《航空涡喷、涡扇发动机结构设计准则（研究报告）》编委会.航空涡喷、涡扇发动机结构设计准则（研究报告）：第3册叶片[M].北京：中国航空工业总公司发动机系统工程局,1997:86-88.
[4]	李飘,姚卫星.镍基单晶合金低周机械疲劳寿命模型评述[J].材料导报,2020,34（5）:9124-9131.
[5]	石多奇,杨晓光,于慧臣.一种镍基单晶和定向结晶合金的疲劳寿命模型[J].航空动力学报,2010,25（8）:1871-1875.
[6]	潘冬,杨晓光,胡晓安,等.镍基单晶合金叶片疲劳寿命预测方法研究[J].航空发动机,2014,40（3）:45-48.
[7]	SHI Duoqi,HUANG Jia,YANG Xiaoguang,et al.Effects of crystallographic orientations and dwell types on low cycle fatigue and life modeling of a SC superalloy[J].International Journal of Fatigue,2013,49：31-39.
[8]	DONG Chenli,YU Huichen,LI Ying,et al.Life modeling of anisotropic fatigue behavior for a single crystal nickel-base superalloy[J].International Journal of Fatigue,2014,61：21-27.
[9]	王荣桥,荆甫雷,胡殿印.基于临界平面的镍基单晶高温合金疲劳寿命预测模型[J].航空动力学报,2013,28（11）:2587-2592.
[10]	岳珠峰,陶仙德,尹泽勇,等.一种镍基单晶超合金高温低周疲劳的晶体取向相关性模型[J].应用数学和力学,2000,21（4）:373-381.
[11]	YUE Z F,LU Z Z.The influence of crystallographic orientation and strain rate on the high-temperature low-cycle fatigue property of a nickel-base single-crystal superalloy[J].Metallurgical and Materials Transactions：A,1998,29（13）:1093-1099.
[12]	孙万超,陆山.多因素镍基单晶合金LCF寿命分析模型[J].机械强度,2013,35（5）:657-662.
[13]	陈宏,蒋洪德.一种镍基单晶合金高温低周疲劳寿命预测方法[J].机械强度,2015,37（5）:857-862.
[14]	罗辅欢,卿华,田洪宇,等.一种考虑各向异性的DD6单晶高温合金低周疲劳寿命预测方法[J].燃气涡轮试验与研究,2019,32（6）:41-44.
[15]	李影,苏彬,吴学仁.高温下取向对DD6单晶高温合金低周疲劳寿命的影响[J].航空材料学报,2001,21（2）:22-25.
[16]	LIU Liu,MENG Jie,LIU Jinlai,et al.Effect of crystal orientations on the low-cycle fatigue of a single-crystal nickel-based superalloy at 980 ℃[J].Acta Metallurgica Sinica,2019,32：381-390.
[17]	SWANSON G,ARAKERE N K.Effect of crystal orientation on analysis of single-crystal nickel-based turbine blade superalloy[R].NASA/TP-2000-210074,2000.
[18]	GABB T P,WELSCH G,MINER R V,et al.The low cycle fatigue deformation response of a single-crystal superalloy at 650 ℃[J].Materials Science and Engineering:A,1989,108：189-202.
[19]	GABB T P,GAYDA J,MINER R V.Orientation and temperature dependence of some mechanical properties of the single-crystal nickel-base superalloy René N4:Part Ⅱ low cycle fatigue behavior[J].Metallurgical Transactions:A,1986,17（3）:497-505.
[20]	DALAL R P,THOMAS C R,DARDI L E.The effect of crystallographic orientation on the physical and mechanical properties of an investment cast single crystal nickel-base superalloy[R].Warrendale,US:Howmet Turbine Components Corporation,1984.
[21]	LI S X,SMITH D J.High temperature fatigue-creep behavior of single crystal SRR99 nickel base superalloys:Part Ⅱ fatigue-creep life behavior[J].Fatigue and Fracture of Engineering Materials and Structures,1995,18（5）:631-643.
[22]	LI S X,ELLISON E G,SMITH D J.The influence of orientation on the elastic and low cycle fatigue properties of several single crystal nickel base superalloys[J].The Journal of Strain Analysis for Engineering Design,1994,29（2）:147-153.
[23]	岳珠峰，于庆民，温志勋，等.镍基单晶涡轮叶片结构强度设计[M].北京：科学出版社，2008:23-27.
[24]	《航空发动机设计用材料数据手册》编委会.航空发动机设计用材料数据手册:第4册[M].北京:航空工业出版社,2010:306-322．
[25]	SEGERSALL M,LEIDERMARK D,MOVERARE J J.Influence of crystal orientation on the thermomechanical fatigue behavior in a single-crystal superalloy[J].Materials Science and Engineering:A,2015,623：68-77.
[26]	张龙飞,燕平,赵京晨,等.DD407单晶高温合金760 ℃屈服强度的LCP模型分析[J].金属学报,2013,49（4）:489-494.