留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

相变微胶囊悬浮液在树形微通道内的热力特性

马杰 孙栗 李松林 彭浩 王刚 蔡晗

马杰, 孙栗, 李松林, 彭浩, 王刚, 蔡晗. 相变微胶囊悬浮液在树形微通道内的热力特性[J]. 航空动力学报, 2021, 36(12): 2545-2554. doi: 10.13224/j.cnki.jasp.20200555
引用本文: 马杰, 孙栗, 李松林, 彭浩, 王刚, 蔡晗. 相变微胶囊悬浮液在树形微通道内的热力特性[J]. 航空动力学报, 2021, 36(12): 2545-2554. doi: 10.13224/j.cnki.jasp.20200555
MA Jie, SUN Li, LI Songlin, PENG Hao, WANG Gang, CAI Han. Thermal performance of microencapsulated phase change material slurry in treelike microchannels[J]. Journal of Aerospace Power, 2021, 36(12): 2545-2554. doi: 10.13224/j.cnki.jasp.20200555
Citation: MA Jie, SUN Li, LI Songlin, PENG Hao, WANG Gang, CAI Han. Thermal performance of microencapsulated phase change material slurry in treelike microchannels[J]. Journal of Aerospace Power, 2021, 36(12): 2545-2554. doi: 10.13224/j.cnki.jasp.20200555

相变微胶囊悬浮液在树形微通道内的热力特性

doi: 10.13224/j.cnki.jasp.20200555
基金项目: 国家自然科学基金项目(51776095); 江苏省高等学校自然科学研究项目(20KJB470005); 江苏省博士后科研资助计划项目(2021K108B)
详细信息
    作者简介:

    马杰(1991-),男,讲师,博士,主要从事强化传热、节能环保技术与装备研究。

    通讯作者:

    彭浩(1981-),男,教授,博士,主要从事高效传热、工业节能与储能技术研究。E-mail:phsight1@hotmail.com

  • 中图分类号: V231.1

Thermal performance of microencapsulated phase change material slurry in treelike microchannels

  • 摘要: 以乙二醇水溶液为载冷基液制备了相变微胶囊悬浮液(MEPCMS),并测量了其物性参数,然后实验研究了MEPCMS在树形微通道内的热力特性,揭示了雷诺数、质量分数对MEPCMS热力性能的影响规律。结果表明:MEPCMS的比定压热容随着微胶囊质量分数与温度的增加而增大,黏度随着微胶囊质量分数的增加与温度的降低而增大;MEPCMS的表面传热系数随着雷诺数与质量分数的增大而增大,当雷诺数为118时,质量分数为1%、3%的MEPCMS的表面传热系数相对于载冷基液分别提高了3.92%和9.04%;MEPCMS的摩擦因子随雷诺数的增大与质量分数的减小而减小,但随着雷诺数的增加,MEPCMS的摩擦因子逐渐接近载冷基液。

     

  • [1] 饶宇,林贵平,罗燕,等.应用于强化传热的相变材料微胶囊的制备及特性[J].航空动力学报,2005,20(4):651-655.
    [2] 王亮,林贵平.相变材料微胶囊表面吸附纳米颗粒对传热过程的影响[J].航空动力学报,2011,26(9):1947-1952.
    [3] 王梦,吴宏,徐国强,等.微小通道流动换热特性分析及其结构优化[J].航空动力学报,2009,24(5):994-999.
    [4] ZHANG Yinping,HU Xianxu,HAO Qing,et al.Convective heat transfer enhancement of laminar flow of latent functionally thermal fluid in a circular tube with constant heat flux: internal heat source model and its application[J].Science in China,2003,46(2):131-140.
    [5] 刘东,何蔚然,钟小龙,等.潜热型功能热流体在微小管道内的换热特性[J].化工进展,2016,35(10):3042-3048.
    [6] LI Gang,HWANG Y,RADERNACHER R,et al.Review of cold storage materials for subzero applications[J].Energy,2013,51:1-17.
    [7] PENG Hao,ZHANG Dong,LING Xiang,et al.n-alkanes phase change materials and their microencapsulation for thermal energy storage:a critical review[J].Energy and Fuels,2018,32(7):7262-7293.
    [8] D??ü?Cü D K,KIZIL ?,BI?ER A,et al.Microencapsulated n-alkane eutectics in polystyrene for solar thermal applications[J].Solar Energy,2018,160: 32-42.
    [9] SARI A,ALKAN C,BILGIN C.Micro/nano encapsulation of some paraffin eutectic mixtures with poly (methyl methacrylate) shell: preparation,characterization and latent heat thermal energy storage properties[J].Applied Energy,2014,136:217-227.
    [10] Al-SHANNAQ R,KURDI J,Al-MUHTASEB S,et al.Supercooling elimination of phase change materials (PCMs) microcapsules[J].Energy,2015,87:654-662.
    [11] WANG Tingyu,WANG Shuangfeng,LUO Ruilian,et al.Microencapsulation of phase change materials with binary cores and calcium carbonate shell for thermal energy storage[J].Applied Energy,2016,171:113-119.
    [12] ZHANG Yi,ZHENG Xianhua,WANG Haitao,et al.Encapsulated phase change materials stabilized by modified graphene oxide[J].Journal of Materials Chemistry A,2014,2(15):5304-5314.
    [13] YU Fei,CHEN Zhonghua,ZENG Xingrong.Preparation,characterization,and thermal properties of microPCMs containing n-dodecanol by using different types of styrene-maleic anhydride as emulsifier[J].Colloid and Polymer Science,2009,287(5):549-560.
    [14] DELGADO M,LAZAR A,PENALOSA C,et al.Experimental analysis of the influence of microcapsule mass fraction on the thermal and rheological behavior of a PCM slurry[J].Applied Thermal Engineering,2014,63(1):11-22.
    [15] HO C J,SIAO C R,YAN W M.Thermal energy storage characteristics in an enclosure packed with MEPCM particles: an experimental and numerical study[J].International Journal of Heat and Mass Transfer,2014,73:88-96.
    [16] GIRO-PALOMA J,MARTINEZ M,CABEZA L F,et al.Types,methods,techniques,and applications for microencapsulated phase change materials (MPCM):a review[J].Renewable and Sustainable Energy Reviews,2016,53:1059-1075.
    [17] HAN Shenjie,CHEN Yanping,Shaoyi LYU,et al.Effects of processing conditions on the properties of paraffin/melamine-urea-formaldehyde microcapsules prepared by in situ polymerization[J].Colloids and Surfaces A:Physicochemical and Engineering Aspects,2020,585:124046.1-124046.9.
    [18] ZHANG Huanzhi,WANG Xiaodong.Fabrication and performances of microencapsulated phase change materials based on n-octadecane core and resorcinol-modified melamine-formaldehyde shell[J].Colloids and Surfaces.A:Physicochemical and Engineering Aspects,2009,332(2/3):129-138.
    [19] 李杰,刘红研,汪树军,等.密胺树脂硫磺微胶囊的制备及应用[J].化工学报,2011,62(6):1716-1722.
    [20] LI Min,CHEN Meirong,WU Zhishen.Enhancement in thermal property and mechanical property of phase change microcapsule with modified carbon nanotube[J].Applied energy,2014,127:166-171.
    [21] ZHANG Yan,JIANG Zhu,ZHANG Zhibing,et al.Polysaccharide assisted microencapsulation for volatile phase change materials with a fluorescent retention indicator[J].Chemical Engineering Journal,2019,359:1234-1243.
    [22] ZHANG Yan,BAIOCCO D,MUSTAPHA A N,et al.Hydrocolloids:nova materials assisting encapsulation of volatile phase change materials for cryogenic energy transport and storage[J].Chemical Engineering Journal,2020,382:123028.1-123028.16.
    [23] 王燕,陈振乾.辛烷相变微胶囊微观熔化实验观测[J].太阳能学报,2014,35(8):1499-1504.
    [24] ZHU Kongying,QI Hengzhi,WANG Shuang,et al.Preparation and characterization of melamine-formaldehyde resin micro- and nanocapsules filled with n-dodecane[J].Macromolecular Science Part B:Physics,2012,51(10):1976-1990.
    [25] GHOGHAEI M S,MAHMOUDIAN A,MOHAMMADI O,et al.A review on the applications of micro-/nano-encapsulated phase change material slurry in heat transfer and thermal storage systems[J].Journal of Thermal Analysis and Calorimetry,2020,145(2):245-268.
    [26] CHAI Lei,SHAUKAT R,WANG Liang,et al.A review on heat transfer and hydrodynamic characteristics of nano/microencapsulated phase change slurry (N/MPCS) in mini/microchannel heat sinks[J].Applied Thermal Engineering,2018,135:334-349.
    [27] RAO Yu,DAMMEL F,STEPHAN P,et al.Flow frictional characteristics of microencapsulated phase change material suspensions flowing through rectangular minichannels[J].Science in china,2006,49(4):445-456.
    [28] RAO Yu,DAMMEL F,STEPHAN P,et al.Convective heat transfer characteristics of microencapsulated phase change material suspensions in minichannels[J].Heat and Mass Transfer,2007,44(2):175-186.
    [29] 饶宇,FRANK D,PETER S,等.相变材料微胶囊悬浮液在矩形小通道内层流流动传热的实验[J].航空动力学报,2006,21(6):1012-1020.
    [30] DAMMEL F,STEPHAN P.Heat transfer to suspensions of microencapsulated phase change material flowing through minichannels[J].Journal of Heat Transfer,2012,134(2):020907.1-020907.8.
    [31] WANG Yan,CHEN Zhenqian,LING Xiang.An experimental study of the latent functionally thermal fluid with micro-encapsulated phase change material particles flowing in microchannels[J].Applied Thermal Engineering,2016,105:209-216.
    [32] 刘志敏,王燕.矩形微通道内相变微胶囊悬浮液换热特性[J].化工机械,2019,46(2):137-141,172.
    [33] 吴兴辉,杨震,陈颖,等.基于离散相模型的相变微胶囊流体传热特性数值模拟[J].化工学报,2020,71(4):1491-1501.
    [34] CHEN Yongping,CHENG Ping.An experimental investigation on the thermal efficiency of fractal tree-like microchannel nets [J].International Communications in Heat and Mass Transfer,2005,32(4):931-938.
    [35] XIE Gongnan,ZHANG Fengli,SUNDEN B,et al.Constructal design and thermal analysis of microchannel heat sinks with multistage bifurcations in single-phase liquid flow [J].Applied Thermal Engineering,2014,62(2):791-802.
  • 加载中
计量
  • 文章访问数:  399
  • HTML浏览量:  226
  • PDF量:  84
  • 被引次数: 0
出版历程
  • 收稿日期:  2020-12-25
  • 刊出日期:  2021-12-28

目录

    /

    返回文章
    返回