留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

镍基单晶高温合金表面铝化物涂层高温氧化机理

李艳明 王全 刘欢 胡鹏 高志坤

李艳明, 王全, 刘欢, 等. 镍基单晶高温合金表面铝化物涂层高温氧化机理[J]. 航空动力学报, 2026, 41(X):20250331 doi: 10.13224/j.cnki.jasp.20250331
引用本文: 李艳明, 王全, 刘欢, 等. 镍基单晶高温合金表面铝化物涂层高温氧化机理[J]. 航空动力学报, 2026, 41(X):20250331 doi: 10.13224/j.cnki.jasp.20250331
LI Yanming, WANG Quan, LIU Huan, et al. Study on High-Temperature Oxidation Mechanism of Aluminide Coatings on the Surface of Nickel-Based Single Crystal Superalloys[J]. Journal of Aerospace Power, 2026, 41(X):20250331 doi: 10.13224/j.cnki.jasp.20250331
Citation: LI Yanming, WANG Quan, LIU Huan, et al. Study on High-Temperature Oxidation Mechanism of Aluminide Coatings on the Surface of Nickel-Based Single Crystal Superalloys[J]. Journal of Aerospace Power, 2026, 41(X):20250331 doi: 10.13224/j.cnki.jasp.20250331

镍基单晶高温合金表面铝化物涂层高温氧化机理

doi: 10.13224/j.cnki.jasp.20250331
详细信息
    作者简介:

    李艳明(1990−),男,工程师,硕士生,从事航空发动机材料应用研究。E-mail:260535498@qq.com

  • 中图分类号: V232.4;TG136.1

Study on High-Temperature Oxidation Mechanism of Aluminide Coatings on the Surface of Nickel-Based Single Crystal Superalloys

  • 摘要:

    镍基单晶高温合金基体上沉积Al涂层和Co-Al涂层,针对1000 ℃高温环境中200小时氧化后的实验样品展开系统性研究工作。实验数据表明,合金基体与两种涂层材料的氧化动力学过程均呈现典型的抛物线型变化趋势。相较于未沉积涂层实验样品和单一Al涂层,Co-Al涂层的氧化速率明显降低。经过高温氧化实验后,可以观察到合金基体表面存在大量孔洞结构及裂纹缺陷,内氧化现象和内氮化反应的发生使得材料抗氧化性能显著下降。与单一Al涂层相比,Co-Al涂层在高温氧化后形成的Al2O3保护膜展现出更优异的抗高温特性,该保护膜缺陷密度较低且纯净度较高,结构更为致密。实验还发现Co元素的引入有效延缓了β-NiAl相向γ'-Ni3Al相的转变过程,难熔金属元素的外扩散行为受到明显抑制,有力促进连续致密Al2O3保护膜的形成。

     

  • 图 1  Al涂层和Co-Al涂层沉积态表面XRD图

    Figure 1.  Surface XRD patterns of Al coating and Co-Al coating in the deposited state

    图 2  原始涂层结构形貌

    Figure 2.  Original coating structure morphology

    图 3  氧化后基体合金XRD图谱

    Figure 3.  XRD pattern of the oxidized base alloy

    图 4  氧化后Al涂层XRD图谱

    Figure 4.  XRD pattern of the oxidized Al coating

    图 5  氧化后Co-Al涂层XRD图谱

    Figure 5.  XRD pattern of the oxidized Co-Al coating

    图 6  基体合金、Al涂层和Co-Al涂层氧化动力学曲线

    Figure 6.  Oxidation kinetics curves of base alloy, Al coating and Co-Al coating

    图 7  合金基体、Al涂层和Co-Al涂层表面形貌

    Figure 7.  Surface morphologies of the alloy substrate, Al coating, and Co-Al coating

    图 8  合金基体、Al涂层和Co-Al涂层截面形貌

    Figure 8.  10 Cross-sectional morphologies of the alloy substrate, Al coating, and Co-Al coating

    图 10  涂层氧化机理示意图

    Figure 10.  Schematic Diagram of Coating Oxidation Mechanism

    图 9  合金基体氧化机理示意图

    Figure 9.  Schematic diagram of the oxidation mechanism of the alloy matrix

    表  1  基体合金、Al涂层和Co-Al涂层氧化速率

    Table  1.   Oxidation Rates of Base Alloy, Al Coating and Co-Al Coating

    材料 氧化速率Kp/(g2/(m4·h)) 拟合区间/h 拟合优度/R2
    合金基体 0.69838±0.05428 50~200 0.962
    Al涂层 0.21491±0.01676 25~200 0.968
    Co-Al涂层 0.19199±0.01469 25~200 0.971
    下载: 导出CSV

    表  2  不同表面区域化学组成(W%)

    Table  2.   Chemical Composition of Different Surface Areas(W%)

    区域 质量分数/%
    Al O Ni Cr Co
    图8(a) 21.0 23.4 32.3 15.8 7.5
    图8(c)(深色) 62.6 30.9 5.5 0.1 0.9
    图8(c)(明亮) 53.4 25.3 17.1 1.1 3.1
    图8(e)(深色) 62.9 32.9 3.3 0.4 0.5
    图8(e)(明亮) 54.8 21.8 15.4 2.5 5.5
    下载: 导出CSV

    表  3  不同截面区域化学组成(W%)

    Table  3.   Chemical Composition of Different Cross-sectional Areas(W%)

    样品 区域 质量分数/%
    Al O Ni Cr Co Ta W Re Mo N
    基体合金 Al2O3 64.3 33.2 1.7 0.5 0.3
    AlN 56.6 21.9 3.4 3.3 14.7
    Al涂层 β-NiAl 16.4 73.5 3.9 6.1
    γ′-Ni3Al 6.0 70.4 2.0 7.5 12.1 1.4 0.6
    Al2O3 56.9 40.3 2.2 0.4 0.2
    MC 0.9 18.8 10.4 9.7 3.9 26.8 24.9 4.6
    Co-Al涂层 β -(Ni,Co)Al 17.1 71.6 3.5 7.8
    γ′-(Ni,Co)3Al 6.0 71.1 2.0 7.6 11.6 1.4 0.4
    Al2O3 61.0 32.7 5.1 0.6 0.6
    MC 0.7 12.9 12.8 10.8 2.4 27.8 26.8 5.9
    下载: 导出CSV
  • [1] 赖建和. 航空发动机涡轮叶片冷却技术综述[J]. 新型工业化, 2021, 11(8): 39-40. LAI Jianhe. Summary of cooling technology for aero-engine turbine blades[J]. The Journal of New Industrialization, 2021, 11(8): 39-40. (in Chinese

    LAI Jianhe. Summary of cooling technology for aero-engine turbine blades[J]. The Journal of New Industrialization, 2021, 11(8): 39-40. (in Chinese)
    [2] 高志坤, 王威, 李艳明, 等. 基于显微组织演变的涡轮叶片损伤分析[J]. 航空发动机, 2022, 48(1): 121-126. GAO Zhikun, WANG Wei, LI Yanming, et al. Damage analysis of turbine blades based on microstructure evolution[J]. Aeroengine, 2022, 48(1): 121-126. (in Chinese doi: 10.13477/j.cnki.aeroengine.2022.01.019

    GAO Zhikun, WANG Wei, LI Yanming, et al. Damage analysis of turbine blades based on microstructure evolution[J]. Aeroengine, 2022, 48(1): 121-126. (in Chinese) doi: 10.13477/j.cnki.aeroengine.2022.01.019
    [3] 张俊峰, 胡锡文, 崔凯, 等. 涡轮叶片典型交叉肋结构的气热分析[J]. 风机技术, 2022, 64(1): 54-59. ZHANG Junfeng, HU Xiwen, CUI Kai, et al. Aero-thermal analysis of cross ribbed structure of turbine blade[J]. Compressor, Blower & Fan Technology, 2022, 64(1): 54-59. (in Chinese

    ZHANG Junfeng, HU Xiwen, CUI Kai, et al. Aero-thermal analysis of cross ribbed structure of turbine blade[J]. Compressor, Blower & Fan Technology, 2022, 64(1): 54-59. (in Chinese)
    [4] 刘迪, 高潘, 蔡杰, 等. GH80A经强流脉冲电子束改性后的高温氧化行为研究[J]. 表面技术, 2018, 47(11): 157-165. LIU Di, GAO Pan, CAI Jie, et al. High temperature oxidation behavior of nickel-based superalloy GH80A treated by high-current pulsed electron beam[J]. Surface Technology, 2018, 47(11): 157-165. (in Chinese doi: 10.16490/j.cnki.issn.1001-3660.2018.11.023

    LIU Di, GAO Pan, CAI Jie, et al. High temperature oxidation behavior of nickel-based superalloy GH80A treated by high-current pulsed electron beam[J]. Surface Technology, 2018, 47(11): 157-165. (in Chinese) doi: 10.16490/j.cnki.issn.1001-3660.2018.11.023
    [5] 郭磊, 高远, 叶福兴, 等. 航空发动机热障涂层的CMAS腐蚀行为与防护方法[J]. 金属学报, 2021, 57(9): 1184-1198. GUO Lei, GAO Yuan, YE Fuxing, et al. CMAS corrosion behavior and protection method of thermal barrier coatings for aeroengine[J]. Acta Metallurgica Sinica, 2021, 57(9): 1184-1198. (in Chinese

    GUO Lei, GAO Yuan, YE Fuxing, et al. CMAS corrosion behavior and protection method of thermal barrier coatings for aeroengine[J]. Acta Metallurgica Sinica, 2021, 57(9): 1184-1198. (in Chinese)
    [6] 李一民, 王升正, 范苛, 等. 基于电站风机表面保护的热喷涂和聚合物涂层研究[J]. 风机技术, 2020, 62(4): 68-74. LI Yimin, WANG Shengzheng, FAN Ke, et al. Thermal spraying and polymer coating based on fan surface protection in power plant[J]. Compressor, Blower & Fan Technology, 2020, 62(4): 68-74. (in Chinese

    LI Yimin, WANG Shengzheng, FAN Ke, et al. Thermal spraying and polymer coating based on fan surface protection in power plant[J]. Compressor, Blower & Fan Technology, 2020, 62(4): 68-74. (in Chinese)
    [7] 陈景阳, 荆甫雷, 杨俊杰. 镍基单晶高温合金热机械疲劳行为与寿命建模[J]. 航空动力学报, 2021, 36(5): 897-906. CHEN Jingyang, JING Fulei, YANG Junjie. Thermo-mechanical fatigue behavior and life modelling in nickel based single crystal superalloy[J]. Journal of Aerospace Power, 2021, 36(5): 897-906. (in Chinese doi: 10.13224/j.cnki.jasp.2021.05.001

    CHEN Jingyang, JING Fulei, YANG Junjie. Thermo-mechanical fatigue behavior and life modelling in nickel based single crystal superalloy[J]. Journal of Aerospace Power, 2021, 36(5): 897-906. (in Chinese) doi: 10.13224/j.cnki.jasp.2021.05.001
    [8] 郭殿品, 张尊礼, 张凡云, 等. 耐热扩散涂层在燃气轮机上的应用现状及趋势[J]. 腐蚀科学与防护技术, 2005, 17(1): 59-62. GUO Dianpin, ZHANG Zunli, ZHANG Fanyun, et al. High temperature corrosion resistant coatings for parts of gas turbines hot section[J]. Corrosion Science and Protection Technology, 2005, 17(1): 59-62. (in Chinese

    GUO Dianpin, ZHANG Zunli, ZHANG Fanyun, et al. High temperature corrosion resistant coatings for parts of gas turbines hot section[J]. Corrosion Science and Protection Technology, 2005, 17(1): 59-62. (in Chinese)
    [9] 李克, 张莉, 丁志敏. 复杂型腔空心叶片气相渗铝工程化应用研究[J]. 航空制造技术, 2016, 59(20): 41-44. LI Ke, ZHANG Li, DING Zhimin. Research on engineering application for vapor aluminizing process of hollow blade[J]. Aeronautical Manufacturing Technology, 2016, 59(20): 41-44. (in Chinese doi: 10.16080/j.issn1671-833x.2016.20.041

    LI Ke, ZHANG Li, DING Zhimin. Research on engineering application for vapor aluminizing process of hollow blade[J]. Aeronautical Manufacturing Technology, 2016, 59(20): 41-44. (in Chinese) doi: 10.16080/j.issn1671-833x.2016.20.041
    [10] LIU P S, LIANG K M, GU S R. High-temperature oxidation behavior of aluminide coatings on a new cobalt-base superalloy in air[J]. Corrosion Science, 2001, 43(7): 1217-1226. doi: 10.1016/S0010-938X(00)00137-2
    [11] LIU P S, LIANG K M. A new way to evaluate the high-temperature oxidation life of aluminide coatings on co-base superalloys in air[J]. Surface and Coatings Technology, 2000, 126(1): 64-68. doi: 10.1016/S0257-8972(00)00519-3
    [12] YANG Shiwei, ZHANG Fanyun, LI Li, et al. High temperature oxidation morphology of Al-Si coating on the superalloy K438[J]. High Temperature Material Processes (an International Quarterly of High-Technology Plasma Processes), 2005, 9(4): 619-624. doi: 10.1615/HighTempMatProc.v9.i4.110
    [13] YANG S, LIU H, ZHU L, et al. High temperature oxidation resistance of Al-Si coating on K4104 superalloy[J]. Journal of Chinese Society for Corrosion and Protection, 2006, 26(6): 371-375. doi: 10.1615/hightempmatproc.v9.i4.110
    [14] MA Jiaojiao, MENG Chuiyi, WANG Hui, et al. Effect of Al content on the high-temperature oxidation resistance and structure of CrAl coatings[J]. Coatings, 2021, 11(12): 1434. doi: 10.3390/coatings11121434
    [15] VIALAS N, MONCEAU D. Effect of Pt and Al content on the long-term, high temperature oxidation behavior and interdiffusion of a Pt-modified aluminide coating deposited on Ni-base superalloys[J]. Surface and Coatings Technology, 2006, 201(7): 3846-3851. doi: 10.1016/j.surfcoat.2006.07.246
    [16] EBACH-STAHL A, FRÖHLICH M. Oxidation study of Pt–Al based coatings on γ-TiAl at 950℃[J]. Surface and Coatings Technology, 2016, 287: 20-24. doi: 10.1016/j.surfcoat.2015.12.043
    [17] DAS D K. Microstructure and high temperature oxidation behavior of Pt-modified aluminide bond coats on Ni-base superalloys[J]. Progress in Materials Science, 2013, 58(2): 151-182. doi: 10.1016/j.pmatsci.2012.08.002
    [18] REN Weipeng, XIAO Chengbo, LI Qing, et al. Microstructure evolution of cobalt aluminide coating on nickel-based superalloys during exposure at 1050 ℃[J]. Vacuum, 2014, 106: 39-45. doi: 10.1016/j.vacuum.2014.03.013
    [19] 任维鹏, 李青, 黄强, 等. 定向凝固镍基高温合金DZ466表面CoAl涂层的氧化及组织演变[J]. 金属学报, 2018, 54(4): 566-574. REN Weipeng, LI Qing, HUANG Qiang, et al. Oxidation and microstructure evolution of CoAl coating on directionally solidified Ni-based superalloys DZ466[J]. Acta Metallurgica Sinica, 2018, 54(4): 566-574. (in Chinese doi: 10.11900/0412.1961.2017.00240

    REN Weipeng, LI Qing, HUANG Qiang, et al. Oxidation and microstructure evolution of CoAl coating on directionally solidified Ni-based superalloys DZ466[J]. Acta Metallurgica Sinica, 2018, 54(4): 566-574. (in Chinese) doi: 10.11900/0412.1961.2017.00240
    [20] 李艳明, 李中生, 刘欢, 等. 镍基高温合金表面Co-Al涂层抗高温氧化性能研究[J]. 航空发动机, 2023, 49(1): 169-174. LI Yanming, LI Zhongsheng, LIU Huan, et al. Research on high temperature oxidation resistance of co-Al coatings on Ni-based superalloy[J]. Aeroengine, 2023, 49(1): 169-174. (in Chinese doi: 10.13477/j.cnki.aeroengine.2023.01.025

    LI Yanming, LI Zhongsheng, LIU Huan, et al. Research on high temperature oxidation resistance of co-Al coatings on Ni-based superalloy[J]. Aeroengine, 2023, 49(1): 169-174. (in Chinese) doi: 10.13477/j.cnki.aeroengine.2023.01.025
    [21] 戴建伟, 易军, 王占考, 等. 单晶高温合金铂改性铝化物涂层的高温氧化行为[J]. 航空材料学报, 2015, 35(5): 32-38. DAI Jianwei, YI Jun, WANG Zhankao, et al. High temperature oxidation behavior of Pt modified aluminide coating on single crystal superalloy[J]. Journal of Aeronautical Materials, 2015, 35(5): 32-38. (in Chinese doi: 10.11868/j.issn.1005-5053.2015.5.006

    DAI Jianwei, YI Jun, WANG Zhankao, et al. High temperature oxidation behavior of Pt modified aluminide coating on single crystal superalloy[J]. Journal of Aeronautical Materials, 2015, 35(5): 32-38. (in Chinese) doi: 10.11868/j.issn.1005-5053.2015.5.006
    [22] LIU He, LI Shuai, JIANG Chengyang, et al. Oxidation performance and interdiffusion behavior of a Pt-modified aluminide coating with pre-deposition of Ni[J]. Acta Metallurgica Sinica (English Letters), 2019, 32(12): 1490-1500. doi: 10.1007/s40195-019-00918-y
    [23] 杨世伟, 张志明, 潘健全, 等. 镍基高温合金渗Al-Si涂层抗高温氧化性能研究[J]. 热加工工艺, 2007, 36(20): 59-61. YANG Shiwei, ZHANG Zhiming, PAN Jianquan, et al. Study on high temperature oxidation properties of Al-Si coatings on superalloy[J]. Hot Working Technology, 2007, 36(20): 59-61. (in Chinese doi: 10.3969/j.issn.1001-3814.2007.20.020

    YANG Shiwei, ZHANG Zhiming, PAN Jianquan, et al. Study on high temperature oxidation properties of Al-Si coatings on superalloy[J]. Hot Working Technology, 2007, 36(20): 59-61. (in Chinese) doi: 10.3969/j.issn.1001-3814.2007.20.020
    [24] 卢旭东, 王复利. Ni-Cr-Co-Mo-W-Ta-Al合金在900 ℃和 1000 ℃的高温氧化行为[J]. 材料研究学报, 2016, 30(8): 589-594. LU Xudong, WANG Fuli. Isothermal oxidation behaviour of Ni-Cr-Co-Mo-W-Ta-Al superalloy at 900 ℃ and 1000 ℃[J]. Chinese Journal of Materials Research, 2016, 30(8): 589-594. (in Chinese doi: 10.11901/1005.3093.2016.163

    LU Xudong, WANG Fuli. Isothermal oxidation behaviour of Ni-Cr-Co-Mo-W-Ta-Al superalloy at 900 ℃ and 1000 ℃[J]. Chinese Journal of Materials Research, 2016, 30(8): 589-594. (in Chinese) doi: 10.11901/1005.3093.2016.163
    [25] 王鑫, 许振华, 彭超, 等. 单晶高温合金铂改性铝化物涂层的高温防护性能研究[J]. 真空, 2020, 57(3): 11-16. WANG Xin, XU Zhenhua, PENG Chao, et al. High temperature protection properties of Pt modified aluminide coating on the single crystal superalloy[J]. Vacuum, 2020, 57(3): 11-16. (in Chinese doi: 10.13385/j.cnki.vacuum.2020.03.03

    WANG Xin, XU Zhenhua, PENG Chao, et al. High temperature protection properties of Pt modified aluminide coating on the single crystal superalloy[J]. Vacuum, 2020, 57(3): 11-16. (in Chinese) doi: 10.13385/j.cnki.vacuum.2020.03.03
    [26] 李艳明, 刘欢, 乔志, 等. 镍基高温合金DD5、DD10和DSM11热腐蚀行为比较[J]. 中国有色金属学报, 2020, 30(9): 2105-2115. LI Yanming, LIU Huan, QIAO Zhi, et al. Comparison on hot corrosion behaviors of Ni-base superalloy DD5, DD10 and DSM11[J]. The Chinese Journal of Nonferrous Metals, 2020, 30(9): 2105-2115. (in Chinese doi: 10.11817/j.ysxb.1004.0609.2020-36479

    LI Yanming, LIU Huan, QIAO Zhi, et al. Comparison on hot corrosion behaviors of Ni-base superalloy DD5, DD10 and DSM11[J]. The Chinese Journal of Nonferrous Metals, 2020, 30(9): 2105-2115. (in Chinese) doi: 10.11817/j.ysxb.1004.0609.2020-36479
    [27] 范其香, 王铁钢, 刘艳梅, 等. 镍基高温合金上Co改性铝化物涂层的组织结构与耐蚀性能[J]. 中国表面工程, 2015, 28(5): 116-122. FAN Qixiang, WANG Tiegang, LIU Yanmei, et al. Microstructure and corrosion behavior of co modified aluminide coatings on Ni-based superalloy[J]. China Surface Engineering, 2015, 28(5): 116-122. (in Chinese doi: 10.11933/j.issn.1007-9289.2015.05.018

    FAN Qixiang, WANG Tiegang, LIU Yanmei, et al. Microstructure and corrosion behavior of co modified aluminide coatings on Ni-based superalloy[J]. China Surface Engineering, 2015, 28(5): 116-122. (in Chinese) doi: 10.11933/j.issn.1007-9289.2015.05.018
    [28] 马春春, 孙建刚, 刘镇洋, 等. Co、Al共渗涂层的性能研究[J]. 热喷涂技术, 2016, 8(2): 30-35. MA Chunchun, SUN Jiangang, LIU Zhenyang, et al. Study of CoAl coating by pack cementation process[J]. Thermal Spray Technology, 2016, 8(2): 30-35. (in Chinese doi: 10.3969/j.jssn.1674-7127.2016.02.007

    MA Chunchun, SUN Jiangang, LIU Zhenyang, et al. Study of CoAl coating by pack cementation process[J]. Thermal Spray Technology, 2016, 8(2): 30-35. (in Chinese) doi: 10.3969/j.jssn.1674-7127.2016.02.007
    [29] 闻明, 姜东慧, 陈志全, 等. 铂铝高温抗氧化涂层的制备及性能研究[J]. 贵金属, 2010, 31(3): 16-22. WEN Ming, JIANG Donghui, CHEN Zhiquan, et al. Study on preparation and properties of Pt-Al high temperature oxidation-resistant coatings[J]. Precious Metals, 2010, 31(3): 16-22. (in Chinese doi: 10.3969/j.issn.1004-0676.2010.03.004

    WEN Ming, JIANG Donghui, CHEN Zhiquan, et al. Study on preparation and properties of Pt-Al high temperature oxidation-resistant coatings[J]. Precious Metals, 2010, 31(3): 16-22. (in Chinese) doi: 10.3969/j.issn.1004-0676.2010.03.004
  • 加载中
图(10) / 表(3)
计量
  • 文章访问数:  41
  • HTML浏览量:  36
  • PDF量:  8
  • 被引次数: 0
出版历程
  • 收稿日期:  2025-07-15
  • 网络出版日期:  2026-04-05

目录

    /

    返回文章
    返回