有大预紧效应的多叶径向箔片轴承的分析

耿海鹏; 戚社苗; 虞烈

有大预紧效应的多叶径向箔片轴承的分析

西安交通大学机械电子及信息系统研究所, 陕西西安 710049

基金项目: 国家自然科学基金资助(50275116);国家863重大项目资助(2002AA5030202002AA414060);西安交通大学博士学位论文基金资助(DT-XJTU2002-3)

计量
- 文章访问数: 1661
- HTML浏览量: 168
- PDF量: 441
- 被引次数: 0
出版历程
- 收稿日期: 2005-04-22
- 修回日期: 2005-08-29
- 刊出日期: 2006-06-28

Analysis of the Multileaf Foil Journal Bearings with Large Preload Effect

Institute of Mechatronics and Information Systems, Xi′an Jiaotong University, Xi′an 710049, China

摘要

摘要: 针对有大预紧效应多叶径向箔片轴承的结构特点,通过引入辅助分析部件建立箔片轴承的非线性接触有限元仿真模型。在分析过程中通过改变作为刚性体的辅助部件和作为柔性体轴承部件之间的几何位置来模拟大预紧多叶箔片径向轴承的装配过程并最终求得箔片轴承中接触应力应变。将处理轴承间隙压力分布的控制方程-雷诺方程和非线性的接触求解过程耦合起来迭代求解,第一次对有大预紧效应的多叶箔片径向轴承进行了完全气弹耦合数值分析。
- 航空、航天推进系统 /
- 多叶箔片轴承 /
- 雷诺方程 /
- 接触有限元 /
- 大预紧
Abstract: According to the structure characteristics of the multileaf foil journal bearing with large preload effect,the nonlinear Finite Element contact model of the foil bearings was established through introducing the assistant parts.The performance of the foil bearings were investigated using Finite Element Method.The assistant parts were used to help form the last contact relationship of foil bearings in the numerical simulation process.These assistant parts were dealt with as rigid bodies without strain.Through modifying the moving contact relationship between the foil bearing parts,the large preload effect of foil bearing was dealt with using the nonlinear contact Finite Element analysis between rigid bodies and flexible bodies.Solution of the governing hydrodynamic equation dealing with compressible fluid was coupled with the structure resiliency of the foil bearing surfaces.In this paper,a typical five leaves foil bearing with large preload effect was analyzed as a successful case to prove the analysis feasibility and accuracy.
- aerospace propulsion system /
- multileaf foil bearing /
- Reynolds equation /
- contact finite element /
- large preload

HTML

参考文献(14)

[1]	Bolk H,Van Rossum.The Foil Bearing-A New Departure in Hydrodynamic Lubrication[J].ASLE J.Lubr.Eng.,1953,9:316～330.
[2]	Christopher DellaCorte,Antonio R Zaldana.A Systems Approach to the Solid Lubrication of Foil Air Bearings for OilFree Turbomachinery[J].ASME Journal of Tribology,2004,126(2):200～207.
[3]	Ma J T S.An Investigation of Self-Acting Foil Bearings[J].ASME J.Basic Eng.,1965,87:837～ 846.
[4]	Gross W A.Gas Film Lubrication[M].John Wiley and Sons,Inc,1962.
[5]	Heshmat H,Shapiro W,Gray S.Development of Foil Journal Bearings for High Load Capacity and High Speed Whirl Stability[J].ASME J.Lubr.Technol.,1982,104 (2):149 ～156.
[6]	Lei J F.Advances in Thin Film Sensor Technologies for Engine Applications[R].ASME Paper No.1997,97-GT458.
[7]	Yu Lie.Solution of Elasto-Aerodynamic Lubrication for Complicant Foil Bearings[J].Journal of Xi'an Jiaotong University,2004,38(3):327～330.
[8]	Oh K P,Rohde S M.A Theoretical Investigation of the Multileaf Journal Bearing[J].ASME Journal of Applied Mechanics,1976,7:237～242.
[9]	Heshmat C A,Heshmat H.An Analysis of Gas Lubricated Multileaf Foil Bearings with Backing Springs[J].ASME Journal of Tribology,1995,117(7):437～443.
[10]	Sudheer Kumar Reddy D,Swarnamani S,Prabhu B S.Analysis of Aerodynamic Multileaf Foil Journal Bearings[J].WEAR,1997,209:115～122.
[11]	Crystal A Heshmat,David S Xu,Hooshang Heshmat.Analysis of Gas Lubricated Foil Thrust Bearings using Coupled Finite Element and Finite Difference Methods[J].ASME Journal of Tribology,2000,122(1):199～204.
[12]	十合晋一.气体轴承设计、制造与应用[M].韩焕臣译.北京:宇航出版社,1988:21～22.
[13]	虞烈,戚社苗,耿海鹏.弹性箔片空气动压轴承的完全气弹润滑解[J].中国科学,E辑,2005,35(7):746～760.Yu lie,Qi Shemiao,Geng Haipeng.A Generalized Solution of Elasto-Aerodynamic Lubrication for Aerodynamic Compliant Foil Bearings[J].Science in China Ser.E Engineering and Materials Science,2005,48 (4):441～429.
[14]	陈火红.MSC Marc/Mentat 2003基础与应用实例[M].北京:科学出版社,2004:232～267.