摘要: 采用三维雷诺平均Navier-Stokes(N-S)方程、renormalization group (RNG) k-ε湍流模型和标准壁面函数对驻涡腔有无喷射的环形中心钝体驻涡燃烧室的冷态流场进行了数值仿真,分析了驻涡腔有无喷射对环形中心钝体驻涡燃烧室涡系结构、驻涡腔流动参数和燃烧室总体性能的影响.结果表明:相比于无喷射时,驻涡腔添加喷射可以使驻涡腔内形成相对稳定的双驻涡结构;驻涡腔喷射的存在使得环形中心钝体驻涡燃烧室出口截面总压损失系数降低约9.2%,并能提高驻涡腔内的平均气流参数;驻涡腔喷射对环形中心钝体驻涡燃烧室出口截面流动参数沿流道高度方向的变化趋势影响不大.
摘要: Nowadays rotating machinery grows and develops extremely fast due to its multi-branch application. Although the fields of rotordynamics and rotor balancing had a strong background based on previous experience in order to perform efficient and safe operation for the rotating machines, still there are problems which are hard to be dealt with in some special cases. One of them is balancing of the rotor with huge overhang. Rotor with overhang is inherent to have console modes, which previously often were observed separately from the other modes in rotordynamic literature. In such a way console modes, their behavior, order of appearance and interaction with other modes were described in current paper in more details. Obtained results confirmed that console modes obey the principle of orthogonality in the same way as all other modes and hence could be efficiently balanced using modal balancing method. Simulation results revealed likelihood of such phenomena as modes order transition, when the rotor has an overhang. As a consequence perfectly balanced console rotor could not be so due to modes order transition effect when the bearing stiffness in situ differs from bearing stiffness of balancing equipment. Described results will be useful for engineers who are involved in area of rotating machinery vibration tuning for the rotor with huge overhang and benefit them to recognize these modes efficiently and to perform balancing successfully.